Lyndex-Nikken C4016-0750-4.00 CAT End Mill Holder

Mfg # C4016-0750-4.00 Type CAT End Mill Holder Size 3/4" Taper CAT 40 Projection 4" Hole Diameter 3/4" Head Diameter 1.75" Through Coolant Yes Length From Gage 4.00" Nose Diameter 1.75" Prop. 65 Yes Set Screw Size 5/8"-18 x 1/2" ...

Semi-Automatic Drill Chuck Drift

AMF Semi-Automatic Drill Chuck Drift Version: Special steel, hardened and burnished. Handle red powder-coated with finger guard. One-handed operation without impact tools (avoids damage to spindle). Tools are released by a wedge effect. Application:...

Drill Chuck Drift

Drill Drifts For Use with Taper Shank Tools Version: Special steel, hardened and burnished. Application: For Morse taper tools to DIN 228 with tang. Standard: DIN 317 Type 317 for Morse tapers 0 Overall length 90 mm Type of product Drill...

HSK 25 coolant tube

Version: Special O-ring up to 120 bar, angular movement from ± 1°, polished, with 2 sealing rings.Coolant-resistant Viton® seals. Fine polished surface, hardened and burnished. Two polished transition radii. Full movement thanks to two...

Garant 25mm Side Lock Arbor Form ADB

Version: With Balluffchip bore.GARANT −All shanks hard turned (for smooth cutting action!). Balancing quality G 2.5 / G 25,000 rpm.With coolant supply holes that can be plugged. Application: For clamping tools with side flat to DIN 1835 B and DIN...

Garant Self-Tightening Three Jaw Drill Chucks

These Garant Self-Tightening German Drill Chucks are high performance precision German three-jaw drill chucks, with high concentricity, keyless, self-tightening, high clamping force. Easily released by hand with wearing parts that are hardened and...

AMF ER Chuck Key ER25 and ER32 Collet Chucks

These AMF ER25 chuck and ER32 chuck keys are designed for uncontrolled tightening torque and for clamping nuts (ER) to DIN 6499. These German ER25 and ER32 Collet Chuck Keysare made of special steel, hardened and galvanized, with a convenient hole...

Garant ER Collet Chuck High Speed Clamping Nuts

This Garant ER German High Speed Collet Chuck for clamping nuts is available in multiple sizes and offers a thread and taper ground in a single setup for highest concentricity.Nut coated for: lower friction and increased clamping force coupled with high...

Holex ER Collet Chuck Clamping Nuts

This Holex German ER Collet Chuck for clamping nuts is available in multiple sizes and has a thread and taper ground in a single setup for highest concentricity. Size 16: With hexagon 25 AF.Size 25; 32: With slots. Suitable for:All standard ER collet...

Holex ER Collet Chuck Form AD SK 50 A = 100

This Holex German ER Collet Chuck Form AD SK 50 A = 100 offers a taper ground internally and externally and comes with Balluffchip bore in multiple sizes. HOLEX precision clamping nut, balanced (G6.3 / 18,000 rpm, all shanks fine bead blasted...

Holex ER Collet Chuck Form AD SK 40 A = 100

This Holex German ER Collet Chuck Form AD SK 40 A = 100 offers a taper ground internally and externally and comes with Balluffchip bore in multiple sizes. HOLEX precision clamping nut, balanced (G6.3 / 18,000 rpm, all shanks fine bead blasted...

Garant ER Collet Chuck Form ADB SK 50 A = 100

This Garant German ER Collet Chuck Form ADB SK 50 A = 100 offers a taper ground internally and externally and comes with Balluffchip bore in multiple sizes for this premium German ER Collet Chuck. Balancing quality G2.5 / 25,000 rpm All shanks hard...

Garant ER Collet Chuck Form ADB SK 40 A = 100

This Garant German ER Collet Chuck Form ADB SK 40 A = 100 offers a taper ground internally and externally and comes with Balluffchip bore in multiple sizes from a German premium ER Collet Chuck. Balancing quality G2.5 / 25,000 rpm All shanks hard...

Lyndex-Nikken CAT50 Shell Mill Arbor with Metric Pilot

This Nikken CAT50 Shell Mill Arbor with Metric Pilot accommodates face mills with pilot bore diameters from diameter 16 mm to 40 mm. Pilot diameter sized for precision fit with milling cutter, with removeable/replaceable drive keys as standard. Fine...

Lyndex-Nikken CAT40 Shell Mill Arbor with Metric Pilot

This Nikken CAT40 Shell Mill Arbor with Metric Pilot accommodates face mills with pilot bore diameters from diameter 16 mm to 40 mm. Pilot diameter sized for precision fit with milling cutter, with removeable/replaceable drive keys as standard. Fine...

Garant SK50 Milling Head Arbors

This Garant German Milling Head Arbors DIN 69871 SK50A = 100 are available in multiple sizes to meet your specific requirements. • From clamping Ø 40 with 4 tapped holes for face mills to DIN 2079.• Taper shank, spigot, and all contact...

Garant Milling Head Arbors DIN 69871 SK40A = 100

This Garant German Milling Head Arbors DIN 69871 SK40A = 100 are available in multiple sizes to meet your specific requirements. • From clamping Ø 40 with 4 tapped holes for face mills to DIN 2079.• Taper shank, spigot, and all contact...