Sale
Zoom the image with the mouse

Garant Circular mills 12L

SKU:
217252
MPN:
217252 12L
Shipping:
Calculated at Checkout
$189.15 - $199.27
Adding to cart… The item has been added
Technical Data

Version:

High precision indexable face mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable face mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power. Suitable inserts APMT 0602..

Application:

For shoulder milling to large depths, also slotting. General use in all steels including stainless and acid-resistantsteels.

Spare part:

Pack of insert screws No. 219827 (6IP; 0.45 Nm).

Note:

Garant torque screwdriver TQ No. 211750 size 0.45, use bit No. 674252 size 6IP.
The insert pocket must be modified when using indexable inserts with a radius of 2 mm.

Technical Data

Cutting edge ⌀ DC 12 mm
Number of cutting edges Z 3
Shank type Plain shank
Setting angle κ 90 degrees
Milling application Circular milling; Ramping; End milling
Spacing of the cutters unequal spacing
Through-coolant yes
Machining strategy MTC
Tool exchange PowerCard
Overhang L1 17 mm
Overall length Ltot 62 mm
Shank ⌀ Ds h6 12 mm
⌀ D3 10 mm
Circular interpolation milling ⌀ Dmin 18 mm
Circular interpolation milling ⌀ Dmax 22 mm
Circular interpolation milling ap 0.8 mm
Ramping angle αmax 1.27 degrees
Ramping length L for αmax 9 mm
suitable indexable insert AP.. 0602..
Pack of insert screws 219827 (6IP; 0.45 Nm)
Type of product End / face mill
Article number 215609-12/3
EAN / GTIN 4045197409805

Technical Data

for insert type   P16
smallest hole D   14 mm - 22 mm
Material of milling tool   Carbide
Shank   DIN 6535 HB
Through-coolant   yes
Tool exchange   PowerCard
Internal d1   9 mm
maximum cutting depth Smax   6.5 mm
Overhang L1   25 mm
Overall length Ltot   71.5 mm
Shank Ds h6   12 mm
Shank type   Weldon
Set of insert screws   219818 (8IP; 3.8 Nm)
Thread depth   21 mm
Type of product   Circular mills

Identification numbers & Classifications

Article number   217252 18
EAN / GTIN   4045197216526
Bottom Banner