Technical Data
Product details
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 38 | |
| Point angle | 180 degrees | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 190 mm | |
| for inch ⌀ | 1 1/2 inch | |
| Overhang LA | 217 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 130511 | |
| Pack of insert screws | 239700 20IP (6.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill | |
| USP1 | with combination shank |
Identification numbers & Classifications
| Article number | 234015 38 | |
| EAN / GTIN | 4045197697479 |
Description
Version:
The helical coolant ducts ensure very high stability, since they do not weaken the core of the drill.
Bore tolerance:−0.1 / +0.35 mm
Description:
For maximum performance and dimensional accuracy. Even for very difficult drilling situations up to 5×D.
Application:
With indexable inserts No.234030-234098.
Recommendation:
When spot-drillingreduce the feed rate by 70 %.
Note:
Other intermediate sizes in 1/10 increments available on request.
