Version:
Digital dial indicator with very large (12 mm), high-contrast LCD display. Immediately ready for use when switched on due to Reference-System.
- Standard: Manufacturer’s standard
- Reversible reading: mm / inch
- Interface: RS232 interface; USB interface; Digimatic interface
- IP Index of Protection: IP 52
- Measured value saving: MAHR reference-lock system
Function:
Display can be zeroed in any position, reversible direction of measurement, buttons can be locked to prevent inadvertent operation, auto-off (selectable). Reactivation by movement or by pressing a key; the reference data is retained at all times.
IP52: Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.
Supplied with:
Dial indicator with screw-on protective aluminium cap on the end of the measuring pin, alternatively a lift-off cap can be fitted. 1 battery No.081560 size CR2032.
Technical Data
| Standard | Manufacturer’s standard |
| Measuring range | 12.5 mm |
| Reversible reading | 0.01 mm |
| Reversible reading | 0.0005 inch |
| Reversible reading | mm / inch |
| Error limit | 0.02 mm |
| Interface | RS232 interface; USB interface; Digimatic interface |
| IP Index of Protection | IP 52 |
| Gauging force | 0.5 − 1 N |
| Clamping shank h6 | 8 mm |
| Measured value saving | MAHR reference-lock system |
| Measurement technology | digital |
| Body | 60 mm |
| Thickness of housing | 28 mm |
| Calibration | C1 |
| Power supply | Battery-powered |
| Number of batteries contained | 1 |
| Article no of the battery / rechargeable battery fitted | 081560 CR2032 |
| Type of product | dial gauge |
| Article number | 434000 12,5 |
| EAN / GTIN | 4045197574701 |
