Rulers & Tape Measures

Version: A particularly high-quality tape measure with a body made from glass-fibre-reinforced polyamide and automatic tape return.For the perfect grip, the contact areas and stop button are coated with 2-component Haptoprene…

Version: Made of stainless spring steel. Clean, electrolytically applied, black graduations and figures with smooth surface. Easy to read. Rounded edges to prevent injuries.Upper edge with ½ mm graduations, lower …

Version: Plastic casing with removable belt clip. Automatic tape return and stop, with damping effect. Sliding end hook. Tape measure printed black/red on yellow.

Version: Hardened, ground, and precision lapped straight edge. Wedge shaped cross section tapering to a point for inspection even in corners, grooves, cut outs etc. With plastic insulated handle to protection against body heat.Mad…

Version: Made of stainless spring steel. Smooth surface with very precise and sharp contrast graduations. Very high accuracy and clear definition for legibility of the scale. Upper edge with ½ mm graduations. Lowe…

Version: Shock-resistant plastic casing. Aluminium inlay on both work faces, giving exact contact surfaces for inside and outside measurement. Aluminium profiles resistant to heat and mechanical loads. Tape measure stove ena…

Version: Made of stainless spring steel. Clean, electrolytically applied, black graduations and figures with smooth surface. Easy-to-read. Rounded edges to prevent injuries.Upper edge with ½ mm graduations, lower …

Version: Plastic casing with removable belt clip. Automatic tape return and stop, with damping effect. Sliding end hook. Tape measure printed black/red on yellow.Tape measure with mm/inch graduations (upper edge inch, lower edge m…

Version: Hard spring steel blades, clearly labelled. Equal width steel blades, pivoted on a riveted joint to fold away. Tapered steel blades. In nickel-plated casing, with clamp.Feeler gauge with brass blades. Non-magnetic,&n…

This Holex Stainless Steel German Rule with Sliding Clip is 150 mm long, features a metric/inch conversion table on the back with removable sliding clip that can be used as a retainer and a depth gauge. Version: Of stainless spr…

Version: A particularly high-quality tape measure with a body made from glass-fibre-reinforced polyamide and automatic tape return.For the perfect grip, the contact areas and stop button are coated with 2-component Haptoprene…

Version: 15-piece set in a metal wall rack. Feeler gauges in plastic boxes. Content: 1 each feeler gauge shim roll No. 478502: 0.01 to 0.1 (0.01 increments) 0.12; 0.15; 0.18; 0.20; 0.25 Supplied with: Fastening material and feeler…

Version: A particularly lightweight and handy tape measure for professional use. Body of glass fibre-reinforced polyamide. With push button for tape lock and automatic return. Plain bearing of special TRIBOCOMP® material …

Version: Compact tester in sturdy two-component housing, visual and acoustic indications. Easy to use due to crocodile clips, includes separate indicator lamp (red and green) for continuity and polarity testing at long distances, …

Version: Of special stainless clock spring steel with ground measuring edges. Wide version. Upper and lower edges both with mm graduations. Very easy to read due to matt surface and sharp graduation scale.Graduations ele…

Version: Measuring beam with precise graduation. Carbide scriber; trammel head with vernier and stop roller. Version - image: Marking tipStop roller Application: For marking out parallel lines. Technical Data Graduation/scale 0…

Version: Ergonomically shaped two-component casing with rubber cover. Large easy-to-read digital display with switchable background lighting. Auto ranging meters. All meters with test prod mounting on the rear for one-hand operati…

Version: Satin surface with cleanly engraved scale. Material: Stainless steel, INOX all parts: hardened Calibration: F8 Technical Data Graduation/scale   0.1 mm Error limit   200 µm Scribe...

Product details Technical Data Standard   Manufacturer’s standard Scale divisions   1 degrees Error limit   ±30 arcmin Stock length   150 mm Graduated arc ⌀   120&n…

Product details Technical Data Standard   EG III Number of sections   10 Length   2 m Width   16 mm Thickness   3.3 mm Type of product   Folding rule Identification &a…

Version: Cold rolled, hard spring feeler strip steel of maximum precision. From size 0.02, the strip thickness is continuously marked and cannot be wiped off (exception: for No. 478502 from size 0.08).Stored in a practic…

Product details Technical Data Standard   EG I Graduation on the top edge   1 mm Graduation on the bottom edge   0.5 mm Error limit   0.12 mm Material   Stainless steel, INOX Cross-sect…

Product details Technical Data Standard   EG II Tape width   16 mm Body length   75 mm Body width   26 mm Body height   70 mm Type of product   Measuring tape Ide…

Product details Technical Data Standard   EG II Band length   3 m Tape width   16 mm Body length   65 mm Body width   25 mm Body height   65 mm Type of produc…

Version: High-quality textile bags equipped with handy tool selections, as a companion for your day-to-day tasks. Supplied with: Tape measure: 1 pc. No.462010 size 5Hexagon key L-wrench set long with ball point: 1 pc. No.627225 si…

Version: Of steel, bright turned. With centre point and screw-in brass button. Technical Data Weight 300 g Type of product Plumb bob Article number 467584 EAN / GTIN 4045197437808

This Set of 7 Precision Measuring Tools in Rigid Foam Inlay is a set of 7 Measuring Tools in a foam toolbox organizer for ease of access and use of these Precision Hand Tools from Holex and Wiha. Version: Popular tool sets in two-…

Product details Technical Data Standard   EG I Material   Stainless steel, INOX Length   300 mm Cross-section width   13 mm Cross-section thickness   0.5 mm Type of product &n…

Product details Technical Data Standard   EG II Band length   3 m Tape width   16 mm Body length   63 mm Body width   24 mm Body height   63 mm Type of produc…

The Holex 3/8" Drive 6 Point socket set is a high-quality tool set designed for professional use. This set includes a range of sockets in various sizes, all of which are made from durable materials to ensure long-lasting performan…

Product details Technical Data Standard   EG II Error limit   0.4 mm Material   Stainless steel, INOX Length   500 mm Cross-section width   30 mm Cross-section thickness  …

Introducing the Holex Hexagon Screwdrivers with T-Handle in Rigid Foam Inlay, a premium set of 7 screwdrivers designed to meet the needs of professionals and DIY enthusiasts alike. Each screwdriver features a hexagon-shaped tip, e…

Version: Compact two-component plastic casing with integral LED torch. Prods with visual indication of voltage by colour change (green to red) and additional acoustic signal. Easily transported, fits any pocket.Additional illumina…

Version: Test leads, 2-piece red / black, test lead ⌀ = 4 mm.CAT III 1000 V / CAT IV 600 V (with protective caps), CAT II 1000 V (without protective caps). Standard: IEC / DIN EN 61010-1 (DIN VDE 0411-1). Suitable for: Digital mul…

Version: Measuring beam and vernier satin chrome-plated. Vernier adjustable. High-contrast scale. Measuring and contact faces precision lapped. Wider bridging widths achievable by using extension base(see No. 4…

Function: Marking and measuring in one. Even for diameter and circumference measurement. Measuring and marking edge of hardened and stainless spring steel. Black numbers = external dimensions, red numbers = i…

Version: Solid semicircular graduated arc with graduation 0 − 180°; reading 1°.Scale plate non-glare chrome-plated. With clamping nut. Standard: Manufacturer’s standard Material: Stainless steel, INOX all par…

Product details Technical Data Standard   EG II Band length   10 m Tape width   25 mm Body length   95 mm Body width   45 mm Body height   98 mm Type of produ…

Version: Sections of glass-fibre reinforced, rigid plastic with matt surface. Extremely wear-resistant and unbreakable; crack-proof / scratch-proof / waterproof. With grooved connections between sections and precisely embossed mm …

Version: Pocket tape measure with mm/inch graduations. Graduations inch/mm (upper and lower edges).Sturdy tape mechanism and handy belt clip. Body of impact-resistant ABS plastic with easy-grip soft components for secure hand…

This comprehensive 13-piece set comes in a sturdy textile bag and includes high-quality pliers, screwdrivers, tape measure, and headlamp. Designed for both professional electricians and DIY enthusiasts, this kit offers everything …