Description
Version:
Digital dial indicator with very large (12 mm), high-contrast LCD display. Immediately ready for use when switched on due to reference system. The REFERENCE measuring system saves and retains the set zero position, even after being switched on again. The lock function prevents measurement errors arising from accidentally touching the control buttons.
Function:
Display can be zeroed in any position, reversible direction of measurement, buttons can be locked to prevent inadvertent operation, auto-off (selectable). Reactivation by movement or by pressing a key; the reference data is retained at all times. IP52: Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.
Supplied with:
Dial indicator with screw-on protective aluminium cap on the end of the measuring pin, alternatively a lift-off cap can be fitted. 1 battery No. 081560 size CR2032.
Optional extras:
Spare and special contact points No. 434900; 434910; 434915, lifting cable No. 434930, data cable No. 498940.
Measured value saving: MAHR reference-lock system
IP Index of Protection: IP 52
Calibration: C1
Reversible reading: 0.01 mm
Reversible reading: 0.0005 in
Measurement variation E MPE (measurement range): 0.02 mm
Gauging force: 0.5 ? 1 N
Clamping shank ? h6: 8 mm
Body ?: 60 mm
Digital dial indicator with very large (12 mm), high-contrast LCD display. Immediately ready for use when switched on due to reference system. The REFERENCE measuring system saves and retains the set zero position, even after being switched on again. The lock function prevents measurement errors arising from accidentally touching the control buttons.
Function:
Display can be zeroed in any position, reversible direction of measurement, buttons can be locked to prevent inadvertent operation, auto-off (selectable). Reactivation by movement or by pressing a key; the reference data is retained at all times. IP52: Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.
Supplied with:
Dial indicator with screw-on protective aluminium cap on the end of the measuring pin, alternatively a lift-off cap can be fitted. 1 battery No. 081560 size CR2032.
Optional extras:
Spare and special contact points No. 434900; 434910; 434915, lifting cable No. 434930, data cable No. 498940.
Measured value saving: MAHR reference-lock system
IP Index of Protection: IP 52
Calibration: C1
Reversible reading: 0.01 mm
Reversible reading: 0.0005 in
Measurement variation E MPE (measurement range): 0.02 mm
Gauging force: 0.5 ? 1 N
Clamping shank ? h6: 8 mm
Body ?: 60 mm
