Shop All

This Holex Combination Wrench is chrome plated and is available in inch sizes. Drop forged wrench with close tolerance jaw width, the Holex German Combination Wrench features an oval shaft in a variety of imperial inch sizes for t…

This Holex German Solid Carbide Drill High Performance with Plain Shank is a German engineered drill bit tool that is specially matched to drill holes without through-coolant.  The concave major cutting edges and special flut…

Version: All faces and edges ground. Inspection test faces ground. Application: For accurate general workshop work. Accuracy: DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030 mm.   Article Numb…

This Johnson Level 40-6184 Magnetic Torpedo Laser Level offers precision measurements, versatility, and durability with four vials that read plumb, level, 45° and cross check with 3 simultaneous 90° laser beams for level, …

The M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting to…

Description Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual 0.05 - 0.5 mm less than nominal, prevents the pin punch jamming i…

Description Version: Strong steel central piece (T-piece) with spigot and collar for holding the inserts. Inserts of wear-resistant nylon (medium hard).Dead-blow due to additional weights in the hammer body. Upon impact, the weigh…

Version: Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.Silicon carbide in medium hard bonding. Lower part SiC 280 / 320 grit (fine); upper part SiC 100 gr…

This Garant Bench Vise is a high quality, 120 mm bench vise made entirely of forged steel and virtually unbreakable.  Version: Entirely of forged steel − guaranteed unbreakable. Slides forward on opening. With pipe…

This Holex German Angle Scriber 48-55 HRC Point Hardness has a 230 mm overall length, 1 straight point and 1 angled point, nylon handle and Point Hardness of 48-55 HRC.

This Holex Ball Point Hexagon Allen Key L-Wrench Inch Sizes are available in multiple inch sizes and are long, Phosphated Allen Wrenches.This precision engineered Holex Hexagon Key L-wrench with ball point features a phosphate sur…

This PB Swiss Tools Angle Scriber offers a 220 mm overall length, with 1 straight and 1 angled point, chrome-plated, point hardness 59 HRC with a nylon handle.This PB Tools Angle Scriber is suitable for high-tensile steels / mater…

This SGS Series 43 S-CARB Solid Carbide End Mill is available in inch measurements and is a 3 flute, solid carbide square end mill designed for high performance machining in non-ferrous work piece materials. This milling cutt…

This Garant Base Model Tool Cabinet with Viewing Windows and Swing Doors are 2000 mm high with mountings for shelves at 25 mm intervals on this precision lockable tool cabinet. Version: Equipped cabinet in 40×20G. Mountings…

The spring-loaded retainer ball, made of high quality steel, retains screws very securely in all positions even when the screw is at an angle. This retention function makes the screwdriver the ideal tool, particularly when sc…

These Garant German High-Precision Countersinks are 90°, uncoated and available in multiple sizes. All countersinks have 3 cutting edges that are radially relieved, with flutes ground from solid. These are high-precision Germa…

This Holex German Combination Wrench in metric is drop-forged, with close tolerance jaw width and oval shaft. The Holex Combination Wrench features chrome vanadium steel and is a chrome plated German Hand Tool Combination Wrench w…

This Holex Flexible Magnetic Retriever is a flexible magnetic retriever with a permanent magnet attached to retrieve metal items in hard to reach places. Specifications/Information:With permanent magnet. Flexible chrome-plated sha…

Version: Straight form; sturdy shank with carbide point, shank hexagon coupling 6 mm   Application: Particularly suitable for marking extra hard materials.   Technical Data overall length   155 mm Type of.…

This Kukko KS-22-01 Pin Extractor set with sliding hammer in plastic case is a sturdy, galvanized extractor with ergonomically shaped sliding hammer for metric sizing. Version Sturdy extractor (galvanized) with ergonomically shape…

This set of 3 Garant Uncoated Hand Taps consists of a taper, second and plug tap in varying sizes that are precision engineered for long life. Technical Data: Coating: Uncoated Flank angle: 60 degrees Thread standard: DIN 13 …

These Holex Steel Feeler Valve Setting Gauges with T2 Accuracy come on a ring, 20 hard spring steel blades, with clear labels for each increment.Equal width steel blades, pivoted on an attached ring, with tapered steel blades in a…

These Garant Gridline Individual Components are 1 mm Stabilizing Plates made from folded sheet metal for reinforcing Garant workbenches. Specifications/Information:Stabilizing plate made from folded sheet metal for reinforcing the…

This Garant Master Tap INOX Machine Tap HSS-E-PM TiAlN is a precision engineered Master Tap INOX UNC Machine Tap, a HSS-E-PM TiAlN High-performance tap, specially developed for good process reliability in stainless and acid-resist…

Version: Forged from high quality steel, internally bevelled for easy fitting to bolt heads.Square drive socket with hole to DIN 3120 D 6.3. Standard: DIN 3124-S Material: Chrome vanadium steel, chrome-plated. Note: GARANT and HOL…

This Holex German Socket Set 1/4 inch Square Drive 27 Pieces Carrying Case with Plastic Inlays in inch sizes that comes complete with a Carrying Case and Plastic Inlays. Square drive: 1/4 Width across flats range, hexagon sockets…

This Holex Set of 11 Fully Insulated Electrician's VDE Screwdrivers in Rigid Foam Inlay are 11 VDE Screwdriver Hand Tools of Fully Insulated Electrician's Screwdrivers (7 Slot Head, 4 Phillips) stored in a foam tool box organizer …

This Holex Through and Blind Hole German Machine Tap is an uncoated, sturdy through and blind hole machine tap with straight flutes. Applications:Tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants.  Recomme…

Version Designed to prevent fingers being trapped. Induction hardened. Notched serrated jaws, self-clamping on pipes and nuts. Multi-position stepped adjustment.Jaws chemically blacked, polished head, plastic coated handles. Stand…

Version Parallel guided, smooth jaws; chrome-plated version. Ratchet adjustment at the push of a button and clamping lever for high contact pressure at the jaws. The travel between the gripping faces is large e…

Description Version: Strong octagonal shank, bright finished point. Uniformly through hardened over the entire length.Head specially annealedto prevent splintering.Special quality,i.e. highest possible tip hardness − approx.…

Only compatible with a standard Velum Air XL Filter Refill Fast, Extra Protection for Compressors The Velum AIR XL patented system, with its thicker, less porous fabric designed to ensure better airflow and prevent overh…

Description Version: Includes six separate outlets, which creates a damping effect; in addition the blow gun satisfies the OSHA safety standards.Compressed air guns with steplessly adjustable air flow, low weight, flexible suspens…

These Garant Combination Pliers Chrome Plated Tool Steel with 2-Component Grips are 180 mm Hand Tool combination pliers made of special tool steel.  Version: Serrated jaws. Cutting edges additionally induction hardened (appro…

Version: High-quality tool textile bags as a companion for your day-to-day tasks. With reflector strips for good visibility.With 2 removable break-resistant tool boards with 12 shaft pockets and 2 external pockets. Additionally 1 …

Version: L-form shaft (allen wrench); ball point can be applied up to an angle of 30°.Chrome vanadium steel, through hardened (toughened), nickel plated. Content: 1 each L-wrench No. 627323: Size 1.5; 2; 2.5; 3; 4; 5; 6; …

This set of German engineered Holex German Jobber Drill Bits consists of 24 drill bits from 1 mm to 10.5 mm, with incremental increases of 0.5 mm, all in a plastic case designed to securely hold the product. This set of Holex Germ…

This Holex German Multi-Flute End Mill offers eccentric relief ground with a TiAlN coating and HSS-Co8 tool material in multiple metric sizes. Technical Data: Coating: TiAlNTool Material: HSS Co 8Standard: DIN 844 BType: NThrough …

This Holex Stainless Steel German Rule with Sliding Clip is 150 mm long, features a metric/inch conversion table on the back with removable sliding clip that can be used as a retainer and a depth gauge. Version: Of stainless spr…

Description Version: High-quality tool textile bags as a companion for your day-to-day tasks. With reflector strips for good visibility.With carrying handle and snap fastener. Bag is fully fold-away for convenient tool withdrawal.…

Version: Popular tool sets in two-colour moulded PE rigid foam inlays. The closed-pore foam is oil-resistant and does not absorb liquids of any sort. Upper layer is anthracite, the underlying contrast color is grey,…

The YG Tools German Solid Combined Drill and Countersink is a Series 301 solid carbide combined drill and countersink with 60 degree counterbore, offering outstanding results from this Combination Drill and Countersink.   WA…

Description Version: Versatile, robust screwdriver with taper blade (tip) and hexagon flats for wrench assistance.Kraftform handlemade of impact resistant plasticwith integral soft zonesfacilitates torque transmission and thus pro…

Product details Technical Data Type   771Md Manufacturer's designation   771Md for external nut ⌀   20 mm - 42 mm overall length   135 mm effective length A   100 mm …

Version: Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of medi…

This Garant Tool Cabinet with Drawers is sized at 24x28G, with drawers of 20x24G, and is a tool cabinet designed for workshop environments. Find more information on the Garant Gridline system capabilities here, including explanati…

These Garant indexable inserts DNMG-VS are available in a variety of styles and designed for medium machining. Designed for DNMG finishing, these Garant Indexable inserts are sold in a box of 10. ISO code indexable insert: DNMG...…

These Garant German Indexable inserts DNMG SM and VM are available in a variety of styles and designed for medium machining. Designed for DNMG finishing, these Garant Indexable inserts are sold in a box of 10. ISO code indexable i…

Product details Technical Data Hexagon   6 mm Square drive   1/2 inch ⌀ drive end   24 mm Length   58 mm Drive profile   Hexagon screwdriver Type of product   Socket…

This Holex Adjustable Wrench with Jaw Scale is a Chrome-Plated, Adjustable Wrench Hand tool available in 100, 150, 200, 250 and 300 mm lengths. Version: Slim design with double-T-profile shank. Jaw angle 22°. Drop-forged and h…