Description
Version:
Torque wrench without scale. Wrench setting using torque analyser. The trigger mechanism makes unintentional overtightening extremely unlikely. Anti-clockwise tightening by reversing the plug-in head.
Function:
On reaching the preset torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again. The long-travel indication gives the user an unmistakable signal that the set torque has been reached.
Application:
For controlled tightening of screws to a pre-set torque during batch productions.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
±4 % of the set value.
Cutting dataa:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
Suitable spare jaws No. 657582 - 657950.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Direction of tightening: For right- and left-hand tightening
Torque measuring accuracy: ±4 %
Exchangeable tool: Plug-in head
Test certificate: Manufacturer's test certificate
Calibration: O6
Calibration: O7
Overall length L: 205 mm
Torque range: 4 - 14 Nm
Weight: 290 g
Adjusted reference dimension on the torque wrench [l2]: 17.5 mm
Socket for plug-in head: 9×12 mm
Torque wrench without scale. Wrench setting using torque analyser. The trigger mechanism makes unintentional overtightening extremely unlikely. Anti-clockwise tightening by reversing the plug-in head.
Function:
On reaching the preset torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again. The long-travel indication gives the user an unmistakable signal that the set torque has been reached.
Application:
For controlled tightening of screws to a pre-set torque during batch productions.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
±4 % of the set value.
Cutting dataa:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
Suitable spare jaws No. 657582 - 657950.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Direction of tightening: For right- and left-hand tightening
Torque measuring accuracy: ±4 %
Exchangeable tool: Plug-in head
Test certificate: Manufacturer's test certificate
Calibration: O6
Calibration: O7
Overall length L: 205 mm
Torque range: 4 - 14 Nm
Weight: 290 g
Adjusted reference dimension on the torque wrench [l2]: 17.5 mm
Socket for plug-in head: 9×12 mm
