GARANT Torque wrench without scale with reversible ratchet

Version:
One-armed torque wrench without a setting scale. Set the desired torque value with setting tool No. 657452 size 1 in conjunction with a suitable test device.
With built-in reversible ratchet with ejector ? for left-hand and right-hand tightening. Torque wrench, only right-hand triggering.
Function:
On reaching the set torque value the wrench triggers giving a "signal"(audible and perceptible) and is then immediately ready for use again.
Application:
For controlled screw tightening etc. to specified torques in batch productions.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
±2% of the set value.
Cutting dataa:
Legend for drawing and formula:

l₁ = Lever length without plug-in head
l₂ = Adjusted reference dimension on the torque wrench
l₃ = Lever length including factory calibration reference dimension
l₄ = Reference dimension of the plug-in head
L = Total length of the tool
T₁ = Torque to be set
T₂ = Specified torque

Direction of tightening: Right-hand tightening
Torque measuring accuracy: ±2 %
Calibration: O6
Calibration: O7
Square drive: 1/4 in
Overall length L: 155 mm
Torque range: 2 - 10 Nm
Weight: 190 g
Square drive: 1/4 in