This Garant German Master Tap NPT Machine Tap HSS-E-PM AlTiX is a German engineered NPT Machine Tap, available in multiple sizes, that is a universal tap, designed for use in a wide spectrum of materials with high process reliability for tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants.
Universal taps, designed for use in a wide spectrum of materials with high process reliability
HSS-E-PM tool material for maximum wear resistance
Reduced coefficient of friction due to the new high-performance coating
Special geometry for optimum chip evacuation
Tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants.
Tapping hole âŒ€ A:
Pre-drill a plain hole without using a reamer.
Tapping hole âŒ€ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer. The taper bore âŒ€ can then be checked laterally by reference to the Dmax check dimension (see table below). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.
Thread type: NPT
Flank angle: 60 degrees
Tool material: HSS E PM
Standard: Manufacturer’s standard
Thread standard: ANSI B 1.20.1
Taper lead form: C
Taper ratio: 1:16
Helix angle: 40 degrees
Shank: Plain shank with h9
Application for type of drilling: For blind hole and through hole
Cutting direction: Right-hand
Type of threading tool: Machine tap for dynamic machining
Color ring: Green
Series: GARANT Master Tap
Type of product: Tap