Where bench loads call for extra rigidity, GARANT GridLine workbench brackets stiffen the joint between a support leg and the worktop. Sold in pairs, the 180 mm (7.1 in.) stabilizing plates belong to the GridLine bench system and bolt on at each leg, bracing benches in maintenance bays, fabrication shops, and assembly areas.
Each plate measures 205 mm (8.1 in.) across with a 40 mm (1.6 in.) depth front to back. Powder-coated light gray RAL 7035 is the standard tone, and a five-tone RAL color selection is available. Two plate types are offered, both carried in the variant selector directly on this page, so match the type to the bench configuration in front of you when ordering.
Key features:
• Bolt-on installation: screws for the leg and worktop come in the package, and GridLine support legs are factory-bored for the plates, so no drilling is needed.
• Sold as a matched pair: one set is sized for one GridLine support leg.
• Folded sheet metal construction: each bracket is a formed plate whose folds give it stiffness without added bulk.
• Material thickness: 1 mm.
What reinforces a workbench that flexes under load?
Bolt-on bracing plates at each support leg reinforce the leg-to-worktop connection, adding stability without rebuilding or replacing the bench.
Applications: workbench reinforcement, support leg bracing, steadying benches under heavy manual work, upgrading installed GridLine benches, bench frame stiffening.
Industries: metalworking, industrial assembly, maintenance and repair operations, workshop trades.
Users: workbench installers, maintenance technicians, shop supervisors, fabricators.
How does a bench bracket stiffen a workbench?
By connecting the leg and the worktop into one braced assembly. Each bench bracket in the pair spans the corner between the two parts, so the frame resists movement that a leg-to-top joint alone would allow, which is the added stabilization the GridLine plates exist to provide.
What tools and hardware does installation require?
Very little. Fixing screws come in the box, and the plates bolt between the support leg and the underside of the worktop. GridLine legs arrive with the mounting bores already drilled, so no layout or drilling is involved. Fit each plate of the pair, drive the screws, and the bench is braced.
Which colors can the stabilizing plates be ordered in?
Five RAL tones are offered: RAL 9002, RAL 7035, RAL 7016, RAL 5012, and RAL 5005. Choose the tone that matches the bench system or the plant's equipment color standard, since the plates sit visibly at each leg of the finished workbench.
Supplied with:
Stabilizing plates as a pair suitable for a support leg No. 927000. Including screws for attaching to the support leg and worktop.
Note:
On the support legs, bores are already in place for attaching the stabilizing plates.
Height: 180 mm
Width: 205 mm
Depth: 40 mm
