Description
NOTE: Colour selection possible
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Supplied with:
Support leg with two Schuko sockets with fastening materials, not wired.
Incl. safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.
Colour:
RAL 7035 light grey powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening. The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Height: 800 mm
Width: 50 mm
Depth: 700 mm
Socket type: J
Nominal voltage: 250 V
Rated current: 10 A
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Supplied with:
Support leg with two Schuko sockets with fastening materials, not wired.
Incl. safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.
Colour:
RAL 7035 light grey powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening. The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Height: 800 mm
Width: 50 mm
Depth: 700 mm
Socket type: J
Nominal voltage: 250 V
Rated current: 10 A
