Description
NOTE: Colour selection possible
Version:
Rear panel or storage shelf of folded sheet metal. For fitting between 2 support legs. Installation as a rear panel provides a modesty board and additional stabilisation. The stated distributed load capacity is applicable when installed as a storage shelf.
Suitable for:
Support legs No. 927000. Corner support leg No. 927112.
Supplied with:
Fastening material.
Colour:
Light grey RAL 7035, powder-coated.
Note:
In order to use the full depth of the workbench as a storage shelf, the two-part storage shelf must be installed. If a storage shelf is installed without a rear panel, additional stabilising plates No. 927122 must be fitted. If fitted as a rear panel no stabilising plates are required.
Not suitable for Ready-to-go workbenches.
Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Width: 900 mm
Depth: 300 mm
Load capacity, distributed: 100 kg
Weight: 3.4 kg
Version:
Rear panel or storage shelf of folded sheet metal. For fitting between 2 support legs. Installation as a rear panel provides a modesty board and additional stabilisation. The stated distributed load capacity is applicable when installed as a storage shelf.
Suitable for:
Support legs No. 927000. Corner support leg No. 927112.
Supplied with:
Fastening material.
Colour:
Light grey RAL 7035, powder-coated.
Note:
In order to use the full depth of the workbench as a storage shelf, the two-part storage shelf must be installed. If a storage shelf is installed without a rear panel, additional stabilising plates No. 927122 must be fitted. If fitted as a rear panel no stabilising plates are required.
Not suitable for Ready-to-go workbenches.
Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Width: 900 mm
Depth: 300 mm
Load capacity, distributed: 100 kg
Weight: 3.4 kg
