Description
Version:
Modular industrial workplace mat for medium to high loads, can be installed in a flexible interlocking system. The ergonomic rubber mat is suitable for dry and wet walking and standing workplaces. The mat surface has an optimally coordinated pivot point and very good slip resistance and position stability. Very easy-to-clean surface with light-reflecting properties. The oil-resistant floor mat has a fire protection class Bfl-s1. Due to the elastic properties of the rubber compound and the special geometry on the rear, the mat has a particularly shock-absorbing and activating effect and protects against unhealthy levels of coldness. Durable mat suitable for multi-shift operation. Electrically dissipative, surface resistance of less than 107?. The mat is marked with an ESD safety label. Bevelled edges on 3 sides to avoid the risk of stumbling. One side with puzzle-type teeth/dovetail connection. Start and end section for installation in rows.
Standard:
EN 61340-4-1, REACH-konform.
Note:
Can be installed on solid flooring such as concrete/screed, synthetic resin flooring, asphalt, tiles. The substructure must be level, clean and smooth. Rubber mats can easily be cut to size with the cutter tool.
Material characteristics: flame resistant
Length: 132 cm
Design length: 130 cm
Width: 100 cm
Thickness: 16 mm
Hardness according to Shore A: 55
Material: Nitrile rubber (NBR)
Modular industrial workplace mat for medium to high loads, can be installed in a flexible interlocking system. The ergonomic rubber mat is suitable for dry and wet walking and standing workplaces. The mat surface has an optimally coordinated pivot point and very good slip resistance and position stability. Very easy-to-clean surface with light-reflecting properties. The oil-resistant floor mat has a fire protection class Bfl-s1. Due to the elastic properties of the rubber compound and the special geometry on the rear, the mat has a particularly shock-absorbing and activating effect and protects against unhealthy levels of coldness. Durable mat suitable for multi-shift operation. Electrically dissipative, surface resistance of less than 107?. The mat is marked with an ESD safety label. Bevelled edges on 3 sides to avoid the risk of stumbling. One side with puzzle-type teeth/dovetail connection. Start and end section for installation in rows.
Standard:
EN 61340-4-1, REACH-konform.
Note:
Can be installed on solid flooring such as concrete/screed, synthetic resin flooring, asphalt, tiles. The substructure must be level, clean and smooth. Rubber mats can easily be cut to size with the cutter tool.
Material characteristics: flame resistant
Length: 132 cm
Design length: 130 cm
Width: 100 cm
Thickness: 16 mm
Hardness according to Shore A: 55
Material: Nitrile rubber (NBR)
