Preset Torque Screwdriver Set, 27-Piece | GARANT TQ-Station
GARANT TQ-Station Torque Screwdriver Set with T-Handle Preset Drivers for TORX and TORX PLUS | Nine Sizes Up To 50.4 in-lb (5.7 Nm)The "TQ-Station", a preset torque screwdriver set from GARANT, brings controlled TORX and TORX PLUS fastening to electronics production, instrument work, and serial assembly benches. Nine T-handle drivers cover a torque range of 0.6 Nm (5.3 in-lb) through 5.7 Nm (50.4 in-lb), one fixed value per driver, so a run of identical screws receives identical torque.
Alongside the drivers, the set includes TORX bits TX6 through TX20, TORX PLUS bits 6IP through 20IP, a magnetic 1/4 inch bit holder, and a modular storage station with three retractable drawers, 27 pieces in all. That puts every torque driver, bit, and accessory in reach at the workstation, with each item returning to its own place after use.
Key features:
• Precision torque screwdriver accuracy: ±15% of the set value on the 0.6 Nm to 1.5 Nm drivers and ±10% on the 2.2 Nm to 5.7 Nm drivers, tested per DIN EN ISO 6789
• Mechanical long-travel release: a tactile and audible signal marks the set torque
• No setting scale: the trigger value is set with a torque analyser rather than dialed in on a scale
• Ergonomic 2-component handle: gives every T-handle torque screwdriver a comfortable, controlled grip
• Steel-framed storage station: lightweight drawers and a non-tipping design keep the set stable on the bench
Which fastening jobs need a preset torque screwdriver?
Choose a preset driver when small TORX or TORX PLUS fasteners must reach one defined torque every time.
Applications: electronics enclosures, instrument assembly, control units, high-volume screwdriving, device servicing, fixture hardware.
Industries: electronics manufacturing, precision engineering, instrument making, equipment assembly, service workshops.
Users: assembly technicians, electronics technicians, service engineers, production supervisors.
What is a torque screwdriver and how does it work?
A torque screwdriver tightens a fastener to a defined torque and signals when that torque is reached, which protects small screws from overtightening. The drivers in this station reset automatically after each release, and the release torque is unlimited, a design meant for repetitive fastening cycles.
How do you use a torque screwdriver correctly?
Fit the matching bit, seat it square in the screw, and turn the GARANT torque screwdriver with steady force until it signals release, then stop turning. Support the workpiece so the fastener stays aligned while torque builds. To keep stated accuracy, have the drivers calibrated against DIN EN ISO 6789, because accuracy is guaranteed only for calibrated tools.
Do you really need a torque limiting screwdriver?
For repetitive TORX fastening to a written torque specification, yes. A torque limiting screwdriver stops driving once its set value is reached, which takes the guesswork out of hand tightening. With nine fixed sizes on the station, you select the driver that matches the specification instead of estimating by feel.
Supplied With:
- Torque screwdrivers No. 211750 in sizes: 0.6, 0.9, 1.2, 1.5, 2.2, 3.0, 3.8, 5.0, 5.7 Nm
- TORX® bits No. 674248: TX6–TX20
- TORX PLUS® bits No. 674252: 6IP–20IP
- 1x modular storage station
- 3x retractable storage drawers
Note:
Accuracy is guaranteed only when calibrated per DIN EN ISO 6789. Individual torque screwdriver sizes available under No. 211750.
