Gripping & Cutting Tools

Version: Chrome vanadium steel. Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); also suitable for piano wire. For working at voltages up to 1000 V to DIN EN IEC 60900 / VDE 0682-201.Pliers chrom…

Version: Offset jaws with V-shaped cutting edges (up to max. 5 mm external ⌀). Laid-in joint with “no-play” action and opening spring. With adjustable screw for cross section adjustment.Handles with multi-component cov…

This 8 Precision Circlip Pliers Set in Rigid Foam Inlay consists of 8 different Garant circlip pliers stored in a rigid foam inlay for use with the Garant Gridline series or in workshop settings. These precision hand tools come co…

Version: Slim head, cutting edges induction hardened and precision ground, fine chamfered.Plastic -coated handles, with opening spring.   Material: Chrome vanadium steel, drop-forged and oil-hardened.   Technical Data …

Product details Technical Data overall length   110 mm Cutting chamfer   very fine bevel Cutting capacity soft wire up to ⌀   0.3 mm - 1.2 mm Cutting capacity medium hard wire up to ⌀ …

Version: Cutting edges without bevel to give a flush cut with no burr. Head and joint polished, plastic coated handles, opening spring.15° angled head.   Application: For flush cutting of plastic sprues on mouldings …

Version: Cutting edges without bevel to give a flush cut with no burr. Head and joint polished, plastic coated handles, opening spring. 45° angled head 150 mm overall length   Application: For flush cutting of plastic spr…

Application: Clean cutting without crushing due to the Vee-shaped cutter. Ideal for cutting hoses and also for some plastic pipes.   Suitable for: Hose shears No. 769940.   Technical Data Type of...

This Kukko 2-Jaw Internal Extractor, Kukko 818-021, is a 2-jaw internal extractor designed for extracting inner bearings, bearing outer rings and bushings. Description The internal extractors of the 818-021 series are used togeth…

This Kukko PULLPO Ball Bearing Puller Set, Kukko Part K-70-A, is a German ball bearing puller set designed to remove grooved ball bearings without causing damage and without having to dismantle the shaft. Description The 18-part …

This Kukko PULLPO Ball Bearing Puller Set, Kukko Part K-70-B, is a German ball bearing puller set designed to remove grooved ball bearings without causing damage and without having to dismantle the shaft. Description The 21-part …

Product details Technical Data Manufacturer's designation   20+ External clamping range   40 mm - 200 mm Internal capacity   100 mm - 260 mm Depth of reach up to   150&n…

This 14 Piece Precision Mechanics Tool Set in Rigid Foam Inlay features Garant and Holex tools, a total of 14 different  precision mechanics tools designed to fit with the Garant Gridline series, workshops and garages. This t…

The single-edged, mechanical nut splitter is used for splitting stuck, rusted or overtightened grade 6 nuts. The threaded pin remains undamaged during this blasting process. The sharp bevelled edge of the chisel penetrates deep in…

This Kukko Set of Bearing Extracting Tools is a brand new Kukko 25-A set of German bearing extracting tools for extracting inner bearings, bearing outer rings and bushings. Description The 8-piece ball bearing extractor set 25-A …