Punches

Version: Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual 0.05 - 0.5 mm less than nominal diameter, prevents the pin punch fro…

Description The Holex Pin Punch Set with Guide Sleeves and Wallet includes nine pin punches with guide sleeves and a wallet for easy storage and organization. Each pin punch has a different tip diameter ranging from 0.9 mm to 5.9 …

Product details Technical Data Tip ⌀ 0.9 mm Pin length 15 mm overall length 70 mm Material Chrome vanadium steel Type of product Parallel pin punches Identification numbers & Classifications A…

Description Version: Sturdy knurled shank with hardened, replaceable point and ergonomic end piece for high user comfort. The impact can be set as required by turning the end piece. Material: Special tool steel. Technical Data …

Description Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual 0.05 - 0.5 mm less than nominal, prevents the pin punch jamming i…

Description This PB Swiss Tools Chrome-Plated Pin Punch set in a plastic clip is a set of 6 chrome plated, vanadium steel PB Tools pin punches in a plastic clip. Version Sturdy octagonal shank with cylindrical shaft. Uniformly thr…

Description Version: Strong octagonal shank, bright finished point. Uniformly through hardened over the entire length.Head specially annealedto prevent splintering.Special quality,i.e. highest possible tip hardness − approx.…

Description This Set of 10 Chisel, Taper Pin Punch and Pin Punch tools in rigid foam inlay consists of 10 Garant precision chisel, taper pin punch and pin punch tools in a foam tool box organizer for Garant Gridline or workshop us…

Description Flat and cross-cut chisels for metal, and taper pin punches and centre punches with octagonal shanks, through hardened; chisels can be reground many times. Head specially annealed to prevent splintering.Speci…

Description Popular tool sets in two-colour moulded PE rigid foam inlays. The closed-pore foam is oil-resistant and does not absorb liquids of any sort. Upper layer anthracite, under which the contrast colour o…

Description P-3 For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch Country of Origin : USA Stock Size : 5/16 Point Diameter : 3/32 Length (Inches) : 4-1/2 P-4 For driv…

Supplied With Rigid foam inlay, empty No. 952001 size 954668: 1 pc.Garant engineer’s hammer No. 750110 size 300: 1 pc.Flat cold chisel No. 740500 size 200: 1 pc.Cross-cut chisel No. 74…

Description Version: Flat and cross-cut chisels for metal, and taper pin punches and centre punches with octagonal shanks, through hardened; chisels can be reground many times. Head specially annealed to prevent splintering. Stand…

Description Version: Sturdy knurled shank with hardened, replaceable point and ergonomic end piece for high user comfort. The impact can be set as required by turning the end piece. Material: Special tool steel. Technical Data …

Description Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealed to prevent splintering. Actual diameter 0.05 - 0.5 mm less than nominal diameter, prev…