1/2 Socket Set + 1/4 Drive, HOLEX 82-Piece in Foam Inlay
The HOLEX 1/4 and 1/2 socket set seats in a molded, two-color PE rigid foam inlay sized for a drawer module 500 mm (19.7 in.) wide and 400 mm (15.7 in.) deep. Tool cribs, production lines, and maintenance bays that track every tool are where that orderly socket storage pays off.
When a piece leaves its cutout, the grey base layer shows through the anthracite surface, so a missing tool is caught at a glance instead of discovered mid-job. That contrast works at tool checkout and again at shift-end review, when one look across the drawer confirms the set is whole. Inside, the 82-piece HOLEX assortment combines a 1/4 inch socket set and a 1/2 inch socket set, pairing small-fastener access with heavier turning capacity in a single drawer.
Key features:
• Two-color signal: grey under anthracite means an empty cutout flags itself.
• Closed-pore PE surface: coolant, lubricant, and oil stay on top of the foam rather than soaking into it.
• Delivered complete: rigid foam inlay plus the HOLEX socket assortment it carries, as a single unit.
• Made for GARANT roller cabinets with full extension drawers, keeping sockets at the workstation rather than on a shelf.
• Output drive: for hex socket screws, recessed TORX® screws, Phillips screws (PH), and slotted screws (SL).
Why pair 1/4 inch and half inch drives in one foam inlay?
One inlay carries light-duty sockets for tight access alongside a half inch socket set for higher-torque fastening, so drive choice never means a second trip to the crib.
Applications: equipment assembly, machine maintenance, vehicle service, fixture fastening, tool crib standardization, line-side repairs.
Industries: manufacturing, automotive repair, plant engineering, fabrication shops, maintenance and repair operations.
Users: maintenance mechanics, assemblers, service technicians, tool crib managers.
Q: What is a socket set used for in a professional shop?
A: A socket set is a collection of interchangeable sockets and drive tools for tightening and loosening bolts and nuts. Treat the 1/4 drive socket set in this inlay as the access kit for small fasteners, and the 1/2 drive socket set as the muscle for larger bolts that need more torque.
Q: Where do you use a socket set that lives in a foam inlay?
A: Work straight out of the drawer. Take the piece you need, run the fastener, and set it back in its outline so the layout stays complete through the shift. Oily tools will not mark the inlay for good, because the closed-pore surface takes in no fluid, and a quick wipe restores it.
Q: Will the foam inlay fit your existing roller cabinet drawers?
A: Measure your drawer before you commit. The inlay needs a drawer offering 400 mm (15.7 in.) of depth and 500 mm (19.7 in.) of width, the module that GARANT full extension drawers provide. Stored this way, a heavy duty socket set stays organized, protected, and close to the machines it serves.
