HOLEX Torx Screwdriver Set with Hexagon Screwdrivers | 14-Piece Foam Inlay Sized 500 mm (19.7 in.) for Cabinet Drawers

Eight Torx screwdrivers and six hexagon screwdrivers share one molded rigid foam drawer inlay in this HOLEX torx screwdriver set of 14, which covers both fastener profiles a bench sees most. The 500 mm (19.7 in.) long, 200 mm (7.9 in.) wide footprint sits flat in a tool cabinet drawer, serving assembly stations, maintenance benches, and machine shops.
The torx set portion runs TX6, TX7, TX8, TX9, TX10, TX15, TX20, and TX25, and the hex screwdriver set side covers 2.5, 3, 4, 5, 6, and 8 mm. Together the fourteen drivers occupy dedicated cutouts, and the inlay itself takes up half of the usable area in a compatible drawer. Every size stays in view, so the driver you need comes out and goes back without searching.

Key features:
• Two-color molded PE construction: anthracite on top with blue underneath, and blue showing through means a driver is out of its pocket.
• Oil-resistant closed-pore foam: the material sheds cutting oil and takes up no liquids, so pockets stay clean in machine areas.
• All fourteen drivers are HOLEX: a single professional line covers both fastener profiles.
• Driver material: chromium vanadium steel.

Do Torx and hex drivers belong in one drawer inlay?
Combining Torx screwdrivers and hex screwdrivers in one inlay puts both everyday profiles at the same bench, cutting trips between drawers.
Applications: machinery servicing, fixture adjustment, equipment assembly, panel and guard removal, small-fastener maintenance, general bench repair.
Industries: metalworking shops, industrial assembly, equipment maintenance, machine building.
Users: maintenance technicians, machine operators, assembly workers, service engineers.

What should you look for in a torx driver set?
Choose a torx driver set whose sizes bracket the fasteners you actually service, with enough increments between them to avoid gaps. This set spans TX6 through TX25 across eight drivers, a spread that steps through the common small and mid sizes without jumps, and adds hex drivers so one inlay covers two profiles.

Where does a torx screw set earn its place in a shop?
A torx screw set covers the star-drive fasteners used across machine housings, guards, fixtures, and equipment panels. Keeping a dedicated Torx group in the drawer means the correct size is on hand instead of an approximation, which protects fastener heads during service work.

Which drawer size accepts this rigid foam inlay?
The inlay is made for new GARANT roller cabinets equipped with full extension drawers whose modules span 500 mm (19.7 in.) across and 400 mm (15.7 in.) front to back. Because it occupies half of that area, you can plan a second inlay or loose storage alongside it in the same drawer.