-
Sku: 308959
Holex ER Sealed Collets for ER 25 Collet Chucks MM and Inch Sizes
MSRP:Was: $25.47Now: $12.74 - $25.47These Holex ER German Sealed Collets for ER 25 Collet Chucks are through hardened and ground, polished and available in MM and inch sizes and are only for nominal diameter.
-
Sku: 308921
Holex ER Sealed Collets for ER 16 Collet Chucks MM and Inch Sizes
MSRP:Was: $23.88Now: $11.94 - $23.88These Holex ER German sealed collets for ER 16 Collet Chucks are through hardened and ground, polished and available in MM and inch sizes and only for nominal diameter.
-
Sku: 309000
Holex ER Collets for ER 32 Collet Chucks MM and Inch Sizes
MSRP:Was: $17.84Now: $8.92 - $17.84These Holex German ER collets for ER 32 Collet Chucks are through hardened and ground, polished and available in MM and inch sizes.Note:The collet clamping diameter range is always up to 1 mm less than nominal, e.g. diameter 10 &m…
-
Sku: 308960
Holex ER Collets for ER 25 Collet Chucks MM and Inch Sizes
MSRP:Was: $20.91Now: $8.33 - $16.65These Holex German ER collets for ER 25 Collet Chucks are through hardened and ground, polished and available in MM and inch sizes.Note:The collet clamping diameter range is always up to 1 mm less than nominal, e.g. diameter 10 &m…
-
Sku: 308920
Holex ER Collets for ER 16 Collet Chucks MM and Inch Sizes Available
MSRP:Was:Now: $15.78 - $19.35These Holex German ER collets for ER 16 Collet Chucks are through hardened and ground, polished and available in MM and inch sizes.Note:The collet clamping diameter range is always up to 1 mm less than nominal, e.g. diameter 10 &m…
-
Sku: U30028
Lyndex-Nikken CAT50 Shell Mill Arbor with Metric Pilot
MSRP:Was: $240.00Now: $120.00 - $128.00This Nikken CAT50 Shell Mill Arbor with Metric Pilot accommodates face mills with pilot bore diameters from diameter 16 mm to 40 mm. Pilot diameter sized for precision fit with milling cutter, with removeable/replaceable drive ke…
-
Sku: U30032
Lyndex-Nikken CAT40 Shell Mill Arbor with Metric Pilot
Now: $69.22MSRP:Was: $138.44This Nikken CAT40 Shell Mill Arbor with Metric Pilot accommodates face mills with pilot bore diameters from diameter 16 mm to 40 mm. Pilot diameter sized for precision fit with milling cutter, with removeable/replaceable drive ke…
-
Sku: U26008
Canela SVUC 93 Degree Boring Bars
MSRP:Was: $63.89Now: $31.95 - $75.00These Canela SVUC 93° Multi-Clamp toolholder for Indexable Inserts is available in a variety of Inch Measurements in both right and left hand models. Size designations of each model are in inches.
-
Sku: 260954
Garant Indexable Inserts TCMT Finishing Machining TCMT 110208/TCMT21.52 Box of 10 Price Per Unit
Now: $4.69MSRP:Was: $9.38These Garant German Indexable inserts with TCMT Finishing Machining are available in a variety of styles and designed for medium machining and sold in a box of 10. Grade: TCMT 110208 TCMT21.52 WARNING: This product can exp…
-
Sku: U26007
Canela A-STFC 90 Degree Boring Bars
Now: $37.22MSRP:Was: $74.44Canela A-STFC 90° Multipurpose boring bar equipped with triangular positive insert. Designation D h h1 L1 L2 f A Insert Size A06M-STFCR/L2 0.375 0.340 0.170 6.000 0.850 0.250 0.500 TC..21.5.. A08M-STFCR/L2 0.500 0.460 0…
-
Sku: U26006
Canela A-SDUC 93 Degree Boring Bars
MSRP:Was: $74.44Now: $37.22 - $53.89These Canela A-SDUC 93° Multi-Clamp toolholder for Indexable Inserts is available in a variety of Inch Measurements in both right and left hand models. Size designations of each model are in inches.
-
Sku: U26005
Canela A-SCLC 95 Degree Boring Bars
Now: $37.22MSRP:Was: $74.44These Canela A-SCLC 95° Multi-Clamp toolholder for Indexable Inserts are available in a variety of Inch Measurements in both right and left hand models. Size designations of each model are in inches.
-
Sku: 252070
Garant Indexable Inserts WNMG 080408 Medium Machining
MSRP:Was: $10.37Now: $5.19 - $10.37These Garant German Indexable Inserts WNMG are available in a variety of styles and designed for medium machining. These German inserts are sold in boxes of 10. Grade: WNMG 080408 WNMG432 Identification numbers & Classificati…
-
Sku: 252068
Garant Indexable Inserts WNMG 080404 Medium
MSRP:Was: $10.37Now: $5.19 - $10.37These Garant Indexable German Inserts WNMG are available in a variety of styles and designed for medium machining. These German Indexable Inserts are sold in a box of 10. Grade: WNMG 080404 WNMG431 Identification numbers &...…
-
Sku: U25044
Canela MWLN 95 Degree Multi-Clamp Toolholder Indexable Inserts Inch Measurements
Now: $21.11MSRP:Was: $42.22This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand
-
Sku: 251912 25/08
Garant MWLN 95 Degree Clamping Toolholder for Indexable Inserts Metric, Right Hand
Now: $59.48MSRP:Was: $118.95This Garant MWLN 95° Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ…
-
Sku: 250158
Garant Indexable Inserts CNMG 120408, medium machining
Now: $9.82MSRP:Was:These Garant Indexable Inserts CNMG are available in a variety of styles and designed for medium machining. Grade: CNMG 120408 CNMG432 WARNING: This product can expose you to Cobalt and Nickel which are known to the State …
-
Sku: 250156
Garant Indexable Inserts CNMG 120404, Medium Machining
MSRP:Was: $9.82Now: $4.91 - $9.82These Garant German Indexable Inserts CNMG are available in a variety of styles and designed for medium machining. Grade: CNMG 120404 CNMG431 WARNING: This product can expose you to Cobalt and Nickel which are known to the…
-
Sku: U25043
Canela MCLN 95 Degree Multi-Clamp Toolholder
Now: $21.11MSRP:Was: $42.22This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand
-
Sku: 250006
Garant MCLN 95 Degree Clamping Toolholder
Now: $52.48MSRP:Was: $104.95This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of …
-
Sku: U22562
Kyocera WNMU Indexable Inserts
Now: $9.01MSRP:Was: $18.01These Kyocera WNMU Indexable inserts for U22028 MFWN face mill are MEGACOAT-coated indexable inserts with 6 edges due to the insert being double-sided. The high axial rake angle up to a maximum of 13° ting force makes the GM g…
-
Sku: U22028 3.0/4
Kyocera THN04726 90 Degree MFWN M-Six Indexable Face Mill WNMU 0806 Inserts
Now: $349.61MSRP:Was: $699.22The Kyocera 90° MFWN M-six indexable face mill for WNMU 0806 with milling inserts is available in Inch Measurements. This Kyocera MFWN Face Mill milling cutter with double-sided inserts and six cutting edges offers the combina…
-
Sku: U22019
Kyocera 90 Degree Indexable Face Mill MEW Milling Inserts Box of 10 Price Per Unit
Now: $7.99MSRP:Was: $15.97These Kyocera 90° indexable face mill MEW Milling Inserts are MEGACOAT-coated indexable inserts with 4 edges. The high axial rake angle up to a maximum of 10° significantly reduces the cutting force. These items are sold i…
-
Sku: U22029
Kyocera THN05103 / THN05117 90 Degree Face Mills
MSRP:Was: $252.25Now: $126.13 - $164.02The Kyocera 90° indexable face mill MEW with Milling Inserts are available in inch increments, with the M-Four MEW being a cost effective 90° milling cutter with 4 cutting edges. The Size .625/2 variant comes without inter…
-
Sku: U22018 2.0/5
Kyocera THN05201 90 Degree Face Mill
Now: $296.37MSRP:Was: $592.75This Kyocera 90° Indexable Face Mill MEW Milling Inserts is available in Inch Measurements and is a a cost effective 90° milling cutter with 4 cutting edges. WARNING: This product can expose you to Cobalt and Nicke…
-
Sku: 215575
Garant Softcut 90 Degree Indexable Milling Cutter MTC with Bore
Now: $296.11MSRP:Was:This Garant Softcut 90° German Indexable Milling Cutter MTC with bore is a high precision indexable face mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. This new genera…
-
Sku: U22027
Kyocera MFPN45 Indexable Face Mill for PN.U1205 Milling Inch Increments
MSRP:Was: $781.20Now: $390.60 - $452.60This Kyocera MFPN45 Indexable face mill for PN.U1205 Milling is available in inch increments and is designed as a high performance face milling cutter with double-sided pentagonal indeable inserts. The cutting angles of the indexa…
-
Sku: 213588
Garant Milling Inserts Softcut 45 High-Performance Indexable Face Mill Box of 10 Price Per Unit
Now: $10.53MSRP:Was:These Garant German Milling Inserts for Softcut 45 High-Performance Indexable Face Mill offer increased insert thickness for the highest metal removal rates and are protected against wear by their coating. WARNING: This pr…
-
Sku: U22024 2.0/8
Kyocera High Feed Rate Indexable Milling Cutter MFH Mini with Bore
Now: $312.09MSRP:Was: $624.17This Kyocera High feed rate Indexable Milling Cutter MFH mini for inserts is designed for extremely cost-effective machining due to high feed rates and included bore. Vibration is minimized by cutting force reduction with this too…
-
Sku: U22026
Kyocera High Feed Rate Indexable Milling Cutter MFH Mini for Inserts
Now: $199.01MSRP:Was: $398.01This Kyocera High feed rate Indexable Milling Cutter MFH mini for inserts is designed for extremely cost-effective machining due to high feed rates. Vibration is minimized by cutting force reduction with this tool.
-
Sku: 203282
Garant Diabolo Solid Carbide Milling Cutter HPC TiAlN
Now: $181.93MSRP:Was:This Garant Diabolo German Solid Carbide Milling Cutter HPC TiAlN is available in metric sizes and offers special geometry, coating and carbide milling, specifically designed for hard machining. Application:For profile milling as …
-
Sku: 203007
Garant Master INOX Solid Carbide Milling Cutter HPC TPC TiAlN Metric Sizes
Now: $42.11MSRP:Was:This Garant Master INOX German Solid Carbide Milling Cutter HPC TPC TiAlN is available in metric sizes and is designed for roughing and finishing.The HPC German end mill with newly developed high-performance coating is designed fo…
-
Sku: U20041
Promax US556 5 Flute Solid Carbide Universal High Performance End Mill Inch Measurements
MSRP:Was: $37.81Now: $18.91 - $63.14The Promax Series US556 5 Flute Solid Carbide Universal High Performance End Mills are available in inch measurements and are a high performance 5 flute solid carbide end mill available in both square end options and with cor…
-
Sku: U20044
Promax US007 4 Flute Solid Carbide Universal High Performance End Mill Inch Measurements
MSRP:Was: $23.88Now: $11.94 - $30.55The Promax Series US007 4 Flute Solid Carbide Universal High Performance End Mill is available in inch measurements and is a high performance 4 flute solid carbide end mill available in both square end or corner radii options. Cut…
-
Sku: U20040
SGS Z-CARB HPR Series Z5 Solid Carbide 5 Flute End Mill
Now: $11.36MSRP:Was: $22.72The SGS Z-CARB HPR series Z5 Solid Carbide End Mill is available in inch measurements and is a 5 flute solid carbide roughing end mill, designed with the ideal balance of helix, indexing, flute depth, rake and relief to achieve hi…
-
Sku: U20038
SGS Series 43 S-CARB Solid Carbide End Mill Inch Measurements
MSRP:Was: $15.61Now: $7.81 - $73.01This SGS Series 43 S-CARB Solid Carbide End Mill is available in inch measurements and is a 3 flute, solid carbide square end mill designed for high performance machining in non-ferrous work piece materials. This milling cutt…
-
Sku: 202004
Garant Master Alu PickPocket HPC Solid Carbide Roughing End Mill
MSRP:Was:Now: $93.01 - $119.07This Garant Master Alu PickPocket HPC German Solid Carbide Roughing End Mill is available in metric sizes and designed for roughing and finishing. With up to 2 × D into solid material at very high feed rates and smooth cutti…
-
Sku: 202272
Garant Solid Carbide End Mill MTC Metric Sizes
MSRP:Was:Now: $46.81 - $304.57This Garant German Solid Carbide End Mill MTC is available in metric sizes with the latest generation of DLC coating sp2. This Solid Carbide German End mill offers eccentric relief ground, additional polish ground in the flutes fo…
-
Sku: 202241
Holex Solid Carbide End Mill Uncoated Metric Sizes
MSRP:Was:Now: $29.66 - $198.28This Holex German Solid Carbide End Mill in metric sizes offers eccentric relief ground, additional finish ground in the flutes for outstanding chip evacuation in long-chipping aluminum workpieces in an uncoated solid carbide slot…
-
Sku: U20030
SGS Series 1 Solid Carbide Square End Mill Inch Measurements
Now: $44.33MSRP:Was: $88.65This SGS Series 1 Solid Carbide End Mill is available in Inch Measurements and is a 4 flute, solid carbide square end mill with Ti-NAMITE-A coating for applications in a wide range of work place materials. WARNING: This pr…
-
Sku: 202760
Holex Solid Carbide End Mill Metric Sizes
MSRP:Was:Now: $15.45 - $152.30This Holex Solid Carbide End Mill is a TiAlN coated, solid carbide end mill, available in metric sizes, that offers an eccentric relief ground without a 45° cutting edge chamfer. Technical Data: Coating: TiAlN Tool material…
-
Sku: 202725
Garant Solid Carbide End Mill Metric Sizes
MSRP:Was: $29.13Now: $14.57 - $450.73This premium Garant German Solid Carbide End Mill is a TiAlN coated, solid carbide German end mill, available in metric sizes, that offers a double relief ground side clearance angle without a 45° cutting edge chamfer. Technic…
-
Sku: 192850
Holex Roughing End Mill Center Cutting Teeth Metric Sizes
MSRP:Was: $29.54Now: $14.77 - $48.93This Holex German Roughing End Mill is available in metric sizes, features center cutting teeth for plunging, a relief ground fine pitch knuckle form profile with a TiAlN coating. Coating: TiAlNTool Material: HSS Co8Standard: DI…
-
Sku: U19010
YG Tools HSS-Co 8% 4 Flute Center Cutting End Mill Inch Measurements
Now: $13.47MSRP:Was: $26.95This YG Tools HSS-Co 8% 4 Flute Center Cutting End Mill is TiAlN coated and recommended for pocketing, trace milling, cam milling, die sinking and slotting.
-
Sku: 191590
Holex Multi-Flute End Mill Metric Sizes
MSRP:Was:Now: $16.74 - $92.67This Holex German Multi-Flute End Mill offers eccentric relief ground with a TiAlN coating and HSS-Co8 tool material in multiple metric sizes. Technical Data: Coating: TiAlNTool Material: HSS Co 8Standard: DIN 844 BType: NThrough …
-
Sku: 156420
Garant Counterbore Set in Case Fine and Medium Available
MSRP:Was:Now: $168.18 - $169.35This Garant German Counterbore Set in Case is available in both DF - Through Hole Fine Quality and DM - Through Hole Medium Quality, with both models featuring sets of the most commonly used counterbores for screws M3, M4, M5, M6,…