Quick view Holex HOLEX Setting wrench for the torque value Setting wrench for the torque value suitable for: Torque wrench No. 657500 $61.57 Add to Cart The item has been added
Quick view Holex HOLEX Shank with magnet / quick-change coupling Version: Two-piece, i.e. shank and bit are separate. This means that in case of wear, only the relevant bit has to be replaced.Adaptor with automatic quick-change coupling and magnet for C 6.3 and E 6.3 bits (the magnet holds the screw).Holder for C 6.3... $13.85 Add to Cart The item has been added
Quick view Holex HOLEX Shank with magnet / snap ring Version: Two-piece, i.e. shank and bit are separate. This means that in case of wear, only the relevant bit has to be replaced.Adaptor with magnet and snap ring for C 6.3 and E 6.3 bits (the magnet holds the screw). Bit socket: D 6.3overall length: 75... MSRP: Was: Now: $15.22 - $28.26 Choose Options
Quick view Holex HOLEX Shank with quick-change coupling and lock Version: Two-piece, i.e. shank and bit are separate. This means that in case of wear, only the relevant bit has to be replaced.Adapter with automatic quick-change coupling for C 6.3 bits. The lock reliably retains the bits; the pulling sleeve is unlocked... $21.06 Add to Cart The item has been added
Quick view Holex HOLEX Shank with snap ring Version: Two-piece, i.e. shank and bit are separate. This means that in case of wear, only the relevant bit has to be replaced.Adaptor to DIN 7427 B with snap ring for C 6.3 bits. Bit socket: D 6.3Shank: SDS Plusoverall length: 69 mmHexagon drive: D 6.3... $18.64 Add to Cart The item has been added
Quick view Holex HOLEX Sheet metal clamp Version: Particularly wide and flat clamping jaws. Sturdy spring steel body. Fully nickel-plated. Application: Particularly suitable for holding, bending, and flanging sheet metal. Material: Chrome vanadium steel clamping jaws. Spare part: Spare spring... $40.91 Add to Cart The item has been added
Quick view Holex HOLEX Sheet metal drill HSS double-sided, uncoated Version: Extremely break-resistant due to short helix and strong core taper. Self-centring point. Cylindrically ground on circumference(without chamfers) to prevent jamming.Vaporised surface.Point geometry shape C.Dimensions similar to DIN 1897... MSRP: Was: Now: $1.72 - $4.28 Choose Options
Quick view Holex HOLEX Sheet metal drill HSS single-sided, uncoated Version: Extremely break-resistant due to short helix and strong core taper. Self-centring point. Cylindrically ground on circumference(without chamfers) to prevent jamming.Vaporised surface.Point geometry shape C.Dimensions similar to DIN 1897... MSRP: Was: Now: $0.97 - $6.09 Choose Options
Quick view Holex HOLEX Shim stock 150x2500 mm, stainless steel MSRP: Was: Now: $46.86 - $219.44 Choose Options
Quick view Holex HOLEX Side cutter VDE insulated Version: Slim shape with induction hardened cutting edges (approx. 62 HRC).Plastic-coated handles to DIN EN 60900 / VDE 0682-201 for working at voltages up to 1000 V.Jaws bright finished, handles with multi-component covering... MSRP: Was: Now: $34.27 - $39.77 Choose Options
Quick view Holex HOLEX Side cutter, bright finish, with grips Version: Slim shape with induction hardened cutting edges (approx. 62 HRC).Jaws bright finished, handles with multi-component covering. Standard: DIN ISO 5749 Material: Chrome vanadium steel, drop-forged and oil-hardened. Cutting capacity soft wire up to... MSRP: Was: Now: $25.94 - $26.99 Choose Options
Quick view Holex HOLEX Single double Vee block with clamp MSRP: Was: Now: $55.34 - $80.38 Choose Options
Quick view Holex HOLEX Single ended ratchet ring spanner VDE fully insulated Version: Drop-forged, chrome-plated. With plastic insulation up to 1000 V to DIN EN IEC 60900 / VDE 0682-201. Material: Chrome vanadium steel. Technical Data Width across flats 10 mm Ratchet... MSRP: Was: Now: $43.29 - $74.31 Choose Options
Quick view Holex HOLEX Single ended ring spanner fully insulated Version: Drop forged; chrome-plated; with plastic insulation up to 1000 Volt to DIN EN IEC 60900 / VDE 0682-201. Material: Chrome vanadium steel. MSRP: Was: Now: $25.50 - $67.33 Choose Options
Quick view Holex HOLEX Single open ended spanner Version: Drop forged, jaw angle 15°, strong shaft. Standard: DIN 894 Material: Special steel (strength 1200 ? 1400 N/mm2). Black oxidised finish. Spanner length L: 110 mmHead thickness hmax: 5 mm MSRP: Was: Now: $3.26 - $598.12 Choose Options
Quick view Holex HOLEX Single-hand knife Version: Lockable single-hand knife with stainless blade. Handle of aluminium with non-slip inlays and clip. Advantage: Quick, easy opening and closing of the blade. Note: Please comply with the relevant national offensive weapons regulations! Germany ?... $14.24 Add to Cart The item has been added
Quick view Holex HOLEX Sledge hammer with hickory handle Version: Forged hammer head, hardened, tempered, and ground on all faces. Surface painted black, working faces bright finished.With hickory handle. Standard: DIN 1042 Material: Special tool steel. Handle length: 600 mm MSRP: Was: Now: $69.20 - $214.46 Choose Options
Quick view Holex HOLEX Sledgehammer Version: Drop-forged hammer head. Faces hardened and tempered. Head painted black, faces bright finished.Sledgehammer with shaped hickory handle. Standard: DIN 6475 Material: Special tool steel. Handle length: 600 mm MSRP: Was: Now: $78.73 - $218.28 Choose Options
