Shop by Category

Wiha

Wiha SoftFinish 11inOne Multi-Driver

This Wiha 11in1 SoftFinish Multi Driver Screwdriver Nut Drive is a German engineered Wiha 11in1 Multi Driver, featuring an ergonomic cushion grip handle, dual durometer construction for exceptional tool life durability and an interchangeable bit and nut...

Williams

Williams Screwdriver Type Pry Bars

Description SpecificationsBlade is heat-treated the entire length. Handle is ergonomically designed to provide a more comfortable and secure grip. Curved blade style gives extra leverage. Selection Williams 17" Screwdriver Type Pry Bar C-812 Williams 3...

Holex

7 Piece Inch Long Hex Key L-Wrench Set (Nickel-Plated)

Version: Angled shank, end faces squared and chamfered. Chrome vanadium steel, through hardened (toughened).Nickel-plated. 1 each L-wrench No. 626108 3/32-5/16 inch.

JSP

Baseball Style Bump Cap, HDPE Protective Liner, Adjustable Back

Baseball Style Bump Cap with HDPE Protective Liner and Adjustable Back Description Getting workers to wear head protection can be tough, especially in areas where hard hats are not required. It's estimated that a third of all impact injuries to the head...

BMI

BMI Locking Tape Measure (mm/inch)

Version: Pocket tape measure with mm/inch graduations. Graduations inch/mm (upper and lower edges).Sturdy tape mechanism and handy belt clip. Body of impact-resistant ABS plastic with easy-grip soft components for secure handling. With push...

BMI

BMI Tape measure, Band length: 5m

Product details Technical Data Standard   EG II Tape width   16 mm Body length   75 mm Body width   26 mm Body height   70 mm Type of product   Measuring tape Identification &...

Ansmann

Button Cell Battery Type 357 for Digital Calipers

Description Version: High quality special batteries. Also for digital calipers.   Product details Technical Data Number of batteries contained 1 chemical composition AgO round Battery designation SR44 International size 357 Nominal...

Canela

Canela 1x1x6 DDJNR164DA Coolant-Through Clamping Toolholder

Canela 1x1x6 DDJNR164DA Coolant-Through Clamping Toolholder suitable for a variety of metal working applications.   

Canela

Canela A-SCLC 95 Degree Boring Bars

These Canela A-SCLC 95° Multi-Clamp toolholder for Indexable Inserts are available in inch measurements in both right and left hand models. Size designations of each model are in inches.  

Chicago Pneumatic

Chicago Pneumatic 1/4 inch Pneumatic Die Grinder

This Chicago Pneumatic 1/4 inch Pneumatic Die Grinder is an industrial die grinder with optimal productivity and high durability for long life. Specifications/Information:• Industrial die grinder• Optimal productivity• Highest durability...

Chicago Pneumatic

Chicago Pneumatic 6500RSR 1/2 inch Pneumatic Impact Wrench

This Chicago Pneumatic 1/2 inch Pneumatic impact wrench is designed to give superior performance for for Industrial Maintenance and Production applications. Specifications/Information:• Best performer for Industrial Maintenance and Production...

Garant

Garant Compressed Air Gun

Description Version: High-quality blow gun for compressed air, with very good ergonomic grip, scratch-resistant surface and solvent-resistant for general-purpose use. Easy to useinterchangeable nozzles.Rotating quick-release head is unlocked, stops in a...

Garant

GARANT Deburrer / scraper set

Version: Plastic handles with clip, each with 1 exchangeable blade.   Supplied with: size S10 - Blade for steel and aluminium No. 838510 size S10.Size N1 - Blade for steel and aluminium No. 839010 size N1.Size CR8 - Blade for...

Garant

Garant Die Sets in a Case Metric Sizes 7 Piece M3-M12

This Garant German Die Set in a Case consists of 7 Die Pieces, sized at M3, M4, M5, M6, M8, M10 and M12, that comes in a Garant branded carrying case. Technical Data: Flank angle: 60 degrees Tool material: HSS Standard: EN 22568 Tolerance class:...

Garant

GARANT easyFix bottle/can holder

Version: Simple insertion in a perforated panel with just one hand, no tools required. Fixed retention without screw fastening, thereby avoiding scratches on the perforated panel. Suitable for: Perforated panels ? 9×9 mm in a 37 mm grid. Supplied with:...

Garant

GARANT easyFix roller holder, ? 6 mm

Version: Simple insertion in a perforated panel with just one hand, no tools required. Fixed retention without screw fastening, thereby avoiding scratches on the perforated panel. Suitable for: Perforated panels with ? 9×9 mm holes at 37 mm pitch. Usable...

Garant

GARANT easyFix set of holders steel hooks

Version: Simple insertion in a perforated panel with just one hand, no tools required. Fixed retention without screw fastening, thereby avoiding scratches on the perforated panel. Suitable for: Perforated panels ? 9×9 mm in a 37 mm grid. Content: 3× tool...

Garant

GARANT Gap gauge Delrin

Garant Gridline

GARANT GridLine Cutting aid

Version: Cutting aid with exchangeable blade and an internally stored spare blade. Blade size 50×19×0.4 mm. Application: For cutting GridLine mats to size, for cutting films and strapping of plastic.

Garant Gridline

GARANT GridLine Manual height adjustment

NOTE: Colour selection possibleVersion: Manual height adjustment as a plug-in module in the feet of the workbench. Height adjustment at 25 mm intervals. Supplied with: Set consisting of 2 plug-in modules, suitable for 1 support leg or 2 feet. Colour:...