Product details
Technical Data
| Exchangeable tool | Plug-in head | |
| Square drive | 3/8 inch | |
| Width b | 33 mm | |
| Height h | 24 mm | |
| Long-term rated loading | 80 Nm | |
| Pitch S | 17.5 mm | |
| No. of teeth | 60 | |
| Plug-in shank | 9×12 mm | |
| Ratchet reversible | yes | |
| Ratchet with ejector | no | |
| Type of product | Ratchet |
Identification numbers & Classifications
| Article number | 657600 1-3/8 | |
| EAN / GTIN | 4018754034512 | |
| Manufacturer number | 58250005 |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Plug-in reversible ratchet.
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1= Lever length without plug-in head
l2= Adjusted reference dimension on the torque wrench
l3= Lever length including factory calibration reference dimension
l4= Reference dimension of the plug-in head
L = Total length of the tool
T1= Torque to be set
T2= Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.
