Description
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Geprüft nach DIN EN ISO 6789.
Cutting dataa:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Direction of tightening: For right and left-hand tightening
Torque measuring accuracy: ±4 %
Test certificate: Manufacturer's test certificate
Calibration: O3
Square drive: 1/2 in
Overall length L: 380 mm
Torque range: 20 - 100 Nm
Scale graduation, 1 graduation =: 1 Nm
Weight: 700 g
Square drive: 1/2 in
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Geprüft nach DIN EN ISO 6789.
Cutting dataa:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Direction of tightening: For right and left-hand tightening
Torque measuring accuracy: ±4 %
Test certificate: Manufacturer's test certificate
Calibration: O3
Square drive: 1/2 in
Overall length L: 380 mm
Torque range: 20 - 100 Nm
Scale graduation, 1 graduation =: 1 Nm
Weight: 700 g
Square drive: 1/2 in
