Description
Version:
High-precision, electronic torque wrench with digital dial gauge display. Body of steel, satin chrome-plated, integral reversible ratchet with ejector. Digital display of the Nm value and battery charge status. A control switch for switching on and reset, automatic switch-off after 2 minutes.
Units of measure: Nm, lbfft. 3.5 inch TFT display with double scale (Nm-lbfft).
Function:
Actual torque can be read on the gauge whilst working; the final value is held to be read later.
Display: Peak and Track function modes.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Cutting dataa:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Mini-USB charger cable for the TFT display. Supplied in a sturdy plastic case
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Direction of tightening: For right- and left-hand tightening
Torque measuring accuracy: ±2 %
Torque measuring accuracy: ±3 %
Test certificate: Manufacturer's test certificate
Calibration: O3
Overall length L: 417 mm
Torque range: 20 - 100 Nm
Torque range: 14 - 75 lbfft
Resolution: 0.1 Nm
Weight: 1020 g
Square drive: 3/8 in
High-precision, electronic torque wrench with digital dial gauge display. Body of steel, satin chrome-plated, integral reversible ratchet with ejector. Digital display of the Nm value and battery charge status. A control switch for switching on and reset, automatic switch-off after 2 minutes.
- Reversible ratchet with ejector.
- Display with battery charge display.
- One button for On / reset.
- Mini-USB port for charging.
- Ergonomically shaped handle.
Units of measure: Nm, lbfft. 3.5 inch TFT display with double scale (Nm-lbfft).
Function:
Actual torque can be read on the gauge whilst working; the final value is held to be read later.
Display: Peak and Track function modes.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Cutting dataa:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Mini-USB charger cable for the TFT display. Supplied in a sturdy plastic case
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Direction of tightening: For right- and left-hand tightening
Torque measuring accuracy: ±2 %
Torque measuring accuracy: ±3 %
Test certificate: Manufacturer's test certificate
Calibration: O3
Overall length L: 417 mm
Torque range: 20 - 100 Nm
Torque range: 14 - 75 lbfft
Resolution: 0.1 Nm
Weight: 1020 g
Square drive: 3/8 in
