Garant Gridline Industrial Workbench with 6-Drawer Lockable Cabinet | 78.7 in. (2000 mm) Heavy-Duty Steel Frame
One secure, organized station for a team’s tooling. The Garant Gridline industrial workbench sets a six-drawer lockable casing under a 78.7 in. (2000 mm) worktop, giving fabrication, assembly, maintenance, and inspection work room to share the same bench without crowding.
The frame is torsion-resistant steel, powder-coated in light gray and anthracite (RAL 7035/7016), made for shops where the bench is loaded on every shift and tools must be exactly where they were left the night before. Fitted drawer storage sits below, a full-length working surface runs above, and the bench holds a team’s tooling while leaving the whole top clear for the work itself.
- Cross-braced 2.0 in. (50 mm) steel legs stand on floor-friendly plastic pads
- Drawer casing with 100 percent full-extension drawers on differential runners
- Each drawer holds up to 165.3 lb (75 kg) of tooling
- Six drawer front heights: 2.0, 3.0, 3.9, 4.9, 5.9, and 7.9 in. (50, 75, 100, 125, 150, 200 mm)
- One-key central cylinder lock secures all six drawers at once
Manufacturer: Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany.
Worktop options:
- Bamboo: five-layer, cross-glued strips approximately 30 percent harder than oak, naturally resistant to water, dirt, and chemicals. The hard-wearing general-purpose choice.
- Beech marine ply: layered beech veneer that resists warping, with a durable, waterproof, oil-resistant surface suited to general workshop duty.
- Beech wood strips: solid beech with a waterproof-glued finish, built for heavy-duty steelwork and fabrication where the surface takes real impact.
- Eluplan: a 2 mm anti-static, abrasion-resistant covering, largely resistant to weak acids and alkalis. The pick for laboratories and assembly stations.
Bamboo, beech marine ply, and beech wood strips are part of the GARANT GreenPlus sustainability line.
Workbench Assembly
What tools do I need to assemble the Gridline workbench?
The bench ships as a kit for self-assembly, which keeps freight cost down. You will need:
- 10 mm socket
- 13 mm socket
- #6 drill bit
- 3/8” Ratchet
- 4 mm hex bit or Allen wrench
- 5 mm (3/16) hex bit or Allen wrench
- Torx T10 bit
- #2 Phillips screwdriver
- Tape measure
- Power drill (preferably an impact drill)
Applications: fixture and tool assembly, equipment maintenance and repair, incoming inspection and gauging, kitting and order preparation, benchtop machining support, and jig and fixture setup all run from this one station.
Industries: precision manufacturing, metal fabrication, MRO operations, laboratories, automotive service, and aerospace suppliers.
Users: machinists, maintenance technicians, assemblers, and quality inspectors.
Will the Gridline workbench fit your floor plan?
The bench measures 78.7 in. (2000 mm) long with a 33.5 in. (850 mm) working height, sized to anchor one wall or an island without giving up drawer storage.
What is the GARANT Gridline system behind this bench?
Gridline is GARANT’s modular equipment system. Benches, cabinets, and mobile ToolCars share a flush, no-overhang design, so stations combine into continuous rows or islands instead of standing as mismatched furniture. Inside the drawers, Gridline dividers and foam inlays fit with zero wasted space. The design has earned Red Dot and iF Design honors, and it makes this workbench a starting point to extend rather than a one-off purchase.
How does the locking system on the 6-drawer cabinet work?
A single central cylinder lock secures all six drawers at once, so closing up a station takes one turn of a key rather than six separate locks. That matters in shared shops and multi-shift operations where tools, inserts, and measuring instruments stay in the bench overnight.
The GARANT GridLine Ecosystem: Beyond the Workbench
This workbench serves as your entry point into the award-winning GARANT GridLine ecosystem, a modular world built on precision. Unlike standard shop furniture, every GridLine component is engineered to work in total harmony; all dividers and foam inlays fit perfectly into these drawers with zero wasted space, ensuring your organization is as professional as your output.
By choosing GridLine, you aren't just buying a singular workbench, you are investing in a scalable system. The flush, "no-overhang" design allows you to seamlessly combine benches, cabinets, and mobile ToolCars into continuous rows or massive islands, maintaining a unified aesthetic that has earned both Red Dot and iF Design honors. Whether you are streamlining today’s workflow or planning for future growth, the integrated media paths and consistent ergonomics ensure your facility remains a high-performance environment that looks as good as it functions.
Don’t just organize your shop, optimize your entire operation!
