Garant Preset Torque Screwdriver, T-Handle Fixed Setting | 1.8–50.4 in-lb (0.2–5.7 Nm), DIN EN ISO 6789
Repeatable fastening at exactly the specified value is the job of this Garant preset torque screwdriver, a fixed-setting, mechanical T-handle tool offered in eighteen preset values from 1.8 to 50.4 in-lb (0.2 to 5.7 Nm). Because settings cannot drift or be adjusted, every operator applies the exact same torque every time. It belongs on assembly stations, tool-setting benches, and instrument work where the torque specification is not negotiable.
Pick the value your fastener specification calls for and the tool holds it, cycle after cycle. A 2-component T-handle gives controlled grip for delicate work, and the tool complies with DIN EN ISO 6789 at a stated accuracy of plus or minus 15 percent.
- One fixed value per driver, chosen per fastener specification
- Mechanical long-travel release with audible click and tactile signal at torque
- Compact 4.2 in. (107 mm) overall length with a 2.0 in. (50 mm) blade
- Accuracy is guaranteed only when calibrated in accordance with DIN EN ISO 6789
Where does a preset torque screwdriver belong?
Preset torque control matters wherever small fasteners must reach the same value every time, from every operator.
Applications: tightening indexable inserts, small fastener assembly to specification, instrument and fixture assembly, repeatable production fastening, and tool setup on cutting equipment.
Industries: precision machining, cutting tool service, electronics and instrument assembly, aerospace suppliers, and medical device manufacturing.
Users: machinists, assembly technicians, tool setters, and quality-critical production staff.
Which torque values does this preset screwdriver come in?
The eighteen fixed settings cover the range from 1.8 to 50.4 in-lb (0.2 to 5.7 Nm), and the variant selector on this page lists every value. A station stocks exactly the settings its fastener specifications call for, and no one can dial a tool away from the process. If several values are needed, the Garant T-Handle Torque Screwdriver TQ-Station 27 piece set is the more economical way to stock multiple values.
How do I know the target torque has been reached?
The mechanical long-travel release gives two signals at once: an audible click and a clear tactile break you feel through the T-handle. The long travel makes the release unmistakable even in a noisy shop, and the driver resets itself for the next fastener. No batteries and no display. The mechanism is the confirmation.
Which bits fit the Garant T-handle torque screwdriver?
The magnetic 1/4 in. holder accepts C 6.3 and E 6.3 bit formats, and the tool is supplied without a bit so you can pair it with the profiles your fasteners need. We recommend TORX and TORX PLUS bits for best results. The magnetic holder keeps the bit seated during positioning, useful when starting small screws at low preset values where a dropped bit costs time and risks the workpiece.
