Orange Tag Clearance

Nikken ER16 Tap Collets are ER Tap Collets that feature a unique design that incorporates an internal square drive with our popular ER Series Collets. The square drive matches the tap square, providing a tight fit and positive dri…

Canela 1X1X6 DDJNL164D Toolholder for a variety of metal turning applications. 

This Canela MCLN 95° multi-clamp toolholder for indexable inserts is available in inch increments and can be purchased in right hand and left hand models.  

These Holex German ER collets for ER 32 Collet Chucks are through hardened and ground, polished and available in MM and inch sizes.Note:The collet clamping diameter range is always up to 1 mm less than nominal, e.g. diameter 10 &m…

Product details Technical Data Rigid foam quality LD45, thickness   30 mm Degree of fill of a drawer in units   6×20 Width   150 mm Depth   500 mm Width in G   6…

This Jepson 14" Ecosaw Saw Blade 355 MM 72T for Steel, Jepson Part Number 608276, is a German Circular Saw Blade that can be used on all all circular saws and cut-off saws. This Jepson Dry Cut Saw Blade features an Ecosaw Dry Cut …

This Kyocera High feed rate Indexable Milling Cutter MFH mini for inserts is designed for extremely cost-effective machining due to high feed rates and included bore. Vibration is minimized by cutting force reduction with this too…

Nikken ER 32 Tap Collets are ER Tap Collets that feature a unique design that incorporates an internal square drive with our popular ER Series Collets. The square drive matches the tap square, providing a tight fit and positive dr…

This Bosch 18V EC Brushless Connected-ready "Freak" 1/4 in and 1/2 in two-in-one bit/socket impact drill kit is a German 18V connected ready two-in-one bit/socket impact drill and driver that delivers outstanding performance...

Canela 1x1x6 DDJNR164DA Coolant-Through Clamping Toolholder suitable for a variety of metal working applications.   

Turning and profiling toolholder equipped with rhombic negative double-sided insert (angle 55º). Designation A B C D F Insert Size DDJNR164DN 1.000 1.000 6.000 1.535 1.250 DN..43..  

These Canela A-SDUC 93° multi-clamp tool holder are available in a variety of inch measurements in both right and left hand models. Size designations of each model are in inches.  

Canela A-STFC 90° Multipurpose boring bar equipped with triangular positive insert. Suitable for a variety of metal boring applications.   Designation D h h1 L1 L2 f A Insert Size A06M-STFCR/L2 0.375 0.340 0.170 6.00…

Turning and profiling toolholder equipped with rhombic negative double-sided insert (angle 55º). Suitable for external profiling and copying toolholder for general applications, roughing, semi-finishing and finishing...

This Canela MWLN 95° multi-clamp tool holder for indexable inserts is available in inch sizes, with both right hand and left hand models available.  

These Canela SVUC 93° Multi-Clamp toolholder for Indexable Inserts is available in a variety of Inch Measurements in both right and left hand models. Size designations of each model are in inches.

Adjustable Tension Type; Steel Material; 0.094 Inch min. Tie Width; 0.184 Inch Max. Tie Width; Pistol Style; Light Duty Cable Tie Type; Used on 18 to 50 lb Cable Tie; Application Cable Tie Installation UPC:  72849411512 …

Product details Technical Data ISO code indexable insert CCMT 09T304 Corner radius 0.4 mm Grade HB7020 Tool material Carbide Main application P Cutting conditions slightly interrupted Chip breaker SM Tolera…

Product details Technical Data Height 100 mm Type of product Compartment divider Identification numbers & Classifications Article number 991721 EAN / GTIN 2050001760746 Description Version: Compa…

Description Version: Sheet metal carrier with plastic tool sockets.   Application: For insertion into drawers.   Colour: RAL 7016 anthracite grey, powder-coated (no other colours available).   Note: VDI 20 so…

Version: Additional socket mounting for fitting to the socket holder. (For the number of sockets, see the relevant size).Simple insertion in a perforated panel with just one hand, no tools required. Fixed retention without screw…

This Fein HSS Slugger Cutter Set comes complete with 6 Core Drills, 2 Pilot Pins and an included plastic case with this Fein German Slugger Bit Set and Cutter Set. Specifications/Information:7/16 Inch to 1-1/16 Inch diameter x 1 I…

Version: Empty cabinet in 40×20G. Suitable drawers: 36×16G (please order these separately)Mountings for shelves at 25 mm intervals. Doors reinforced on the inside and can be locked by 2-component Haptoprene® h…

The Garant German Solid Carbide HPC Drill with 4 cooling channels is a German engineered drill designed to offer outstanding results in a variety of applications. This Garant HPC Drill includes a cutting chisel edge with high cent…

The Garant German Solid Carbide HPC Drill with 4 cooling channels is a German engineered drill designed to offer outstanding results in a variety of applications. This Garant HPC Drill includes a cutting chisel edge with high cent…

Ergonomically shaped power grip with easy-grip Haptoprene surface and an impact-resistant plastic core. The special surface structure allows transmission of high torques, even with wet or oily hands. Blade…

GARANT Perforated Rear Panel – 500×518 mm, Single-Sided (955320 S) Product Overview:Maximize your workshop’s organization with the GARANT Perforated Rear Panel. Crafted from durable folded sheet metal and finishe…

GARANT GridLine easyPick Small Parts Storage Bin Set 50/1 – 25 mm Height Product Overview:Keep small components neat and accessible with the GARANT GridLine easyPick Small Parts Storage Bin Set. Designed to fully utilize 20&…

GARANT GridLine Drawer Divider Set 75/1 – For 20×24G Drawers, 50 mm Height Product Overview:Maximize organization in larger drawers with the GARANT GridLine Divider Set 75/1, purpose-built for 20×24G drawers (500…

GARANT GridLine Drawer Divider Set 100/1 – For 26×20G Drawers, 75 mm Height Product Overview:Optimize drawer space with the GARANT GridLine Divider Set 100/1, designed to fully outfit drawers with a 26×20G usable…

GARANT GridLine Drawer Divider Set 75/1 – For 20×20G Drawers, 50 mm Height Product Overview:Create a fully modular drawer layout with the GARANT GridLine Divider Set 75/1, designed for precise organization in drawers w…

These Garant Gridline Individual Components are Garant Modules for Media Tracks to customize your workshop media tracks for your individual configurations. Version: Of sheet metal modular design. All power components...

This Garant German Hand Deburrer Countersink 90° with Non-Slip Coating is a three-flute German countersink with ergonomic plastic handle. The handy power grip made of tough and impact-resistant polypropylene has a special surf…

These Garant Indexable Inserts CNMG are available in a variety of styles and designed for medium machining in continuous or slightly interrupted turning applications.  Grade: CNMG 120404 CNMG431   WARNING: This product …

These Garant German Indexable Inserts DNMG are available in a variety of styles and designed for medium machining. Designed for DNMG finishing, these Garant Indexable inserts are sold in a box of 10. ISO code indexable insert: DNM…

These Garant German Indexable Inserts DNMG are available in a variety of styles and designed for medium machining. Designed for DNMG finishing, these Garant Indexable inserts are sold in a box of 10. ISO code indexable insert: DNM…

These Garant German Indexable Inserts DNMG are available in a variety of styles and designed for medium machining. Designed for DNMG finishing, these Garant Indexable inserts are sold in a box of 10. ISO code indexable insert: DNM…

These Garant German Indexable inserts DNMG are available in a variety of styles and designed for medium machining. Designed for DNMG finishing, these Garant Indexable inserts are sold in a box of 10. ISO code indexable insert: DNM…

These Garant Indexable German Inserts WNMG are available in a variety of styles and designed for medium machining turning applications. These German-made inserts are sold in a box of 10. Grade: WNMG 080404 WNMG431 Identification n…

Garant Ergonomic Knee Pad – Heavy-Duty PUR Kneeling Cushion Product Overview:Stay comfortable and protected during long hours of kneeling or crouching. This anatomically shaped, ergonomic knee pad is made from high-quality p…

Garant 20 mm Solid Carbide End Mill – Master Alu Series | DLC Coated for Aluminum Milling Product Overview:The Master Alu Series 20 mm solid carbide end mill is engineered for high-performance aluminum machining. Featuring a…

This Garant Master Steel Feed German Solid Carbide Drill Plain Shank TiAIN drill is an outstanding, German engineered product suitable for use in a variety of conditions. The Garant German Master Steel Feed Solid Carbide Drill is …

This Garant Master Tap German Blind Hole Machine Tap HSS E-PM is a universal tap, designed for use in a wide spectrum of materials with high process reliability. • HSS-E-PM tool material for a high degree of wear resistance.&…

This Garant Master Tap Through Hole Machine Tap is a precision engineered universal tap, designed for use with a wide spectrum of materials without outstanding, high process reliability. Features: HSS-E-PM tool material for a hig…

This Garant NC Spot Drill Bit is a 120 degree Plain Shank Drill Bit, made to precision specifications, and available in a number of different metric measurements. The Garant NC Spot Drill Bit offers a precision centered ground poi…

Garant 4 mm Shrink-Fit Chuck – SK 50 A = 120 | Article No. 302342 4 Product Overview:This precision shrink-fit chuck is engineered for high-speed cutting (HSC) and high-performance cutting (HPC) applications. With an ultra-s…

This Garant Softcut 90° German Indexable Milling Cutter MTC with bore is a high precision indexable face mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. This new genera…

Garant 7.8 mm Solid Carbide Jobber Drill – 12×D | DLC Coated for Aluminum & Plastics Product Overview:Engineered for deep hole drilling with exceptional precision, this 7.8 mm solid carbide jobber drill features a …

Version: Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.Lengths similar to DIN 6527 long. Tool material: Solid car…

Product description 45° angled tips Forged GEDORE chrome-vanadium special hardened and tempered steel Precision machined, oil hardened and annealed Black, with blue dipped handles Black, with blue dipped handles