Shop by Category

Holex

HOLEX Weld seam gauge, 12 blades

Holex

HOLEX Welder's clamp

Version: U-shaped clamping jaws; upper jaw angled 90°. Sturdy spring steel body. Fully nickel-plated. Application: For clamping profiled or flat materials etc. when welding. Material: Chrome vanadium steel clamping jaws. Spare part: Spare spring No...

Holex

HOLEX Wheel pin

Suitable for: Pipe cutter: No. 818000 / 818300 / 819320 / 819350 / 818305

Holex

HOLEX Wheel pin

Suitable for: Pipe cutter: No. 818100 / 818150 / 819625 overall length: 20 mm?: 5 mm

Holex

HOLEX White rubber hammer

Version: Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.White rubber face for working without formation of streaks. Standard: DIN 5128 Spare part: Spare handle...

Holex

HOLEX Wire stripping tool

Version: High-tensile tool steel with plastic grips. Advantage: No limit of the length to be stripped, i.e. insulation can be stripped from the middle of the cable. overall length: 225 mmfor conductor cross-section: 0.2 - 6 mm2

Holex

HOLEX Wire stripping tool

Version: Offset jaws with V-shaped cutting edges (up to max. 5 mm external ?). Laid-in joint with "no-play" action and opening spring. With adjustable screw for cross section adjustment.Jaws bright finished, handles with multi-component covering...

Holex

HOLEX Wire stripping tool

Version: Offset jaws with V-shaped cutting edges (up to max. 5 mm external ?). Laid-in joint with "no-play" action and opening spring. With adjustable screw for cross section adjustment.Jaws bright finished, plastic coated handles. Material: Special tool...

Holex

HOLEX Wire stripping tool VDE insulated

Version: Offset jaws with V-shaped cutting edges (up to max. 5 mm external ⌀). Laid-in joint with “no-play” action and opening spring. With adjustable screw for cross section adjustment.Handles with multi-component covering, insulated up...

Holex

HOLEX Work table

Version: Worktop made of 30 mm thick, non-warping beech marine ply, waterproof glued and with oiled surface. Base of bolted rectangular tubular frame (30×30 mm), with plastic floor pads. Colour: Base frame RAL 7035 light grey powder-coated.No special...

Holex

HOLEX Workbench with 1 drawer and 2 swing doors

NOTE: Colour selection possibleVersion: Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening...

Holex

HOLEX Workbench with 2 drawers and 2 swing doors

NOTE: Colour selection possibleVersion: 40 mm thick worktop, non-warping, made of beech marine ply, oiled.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening angle 180° and...

Holex

HOLEX Workbench with 2 drawers and 3 swing doors

NOTE: Colour selection possibleVersion: Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening...

Holex

HOLEX Workbench with 3 drawers and 1 swing door

NOTE: Colour selection possibleVersion: Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening...

Holex

HOLEX Workbench with 3 drawers and 1 swing door

NOTE: Colour selection possibleVersion: Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening...

Holex

HOLEX Workbench with 3 drawers and 2 swing doors

NOTE: Colour selection possibleVersion: Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening...

Holex

HOLEX Workbench with 4 drawers and 1 swing door

NOTE: Colour selection possibleVersion: 40 mm thick worktop, non-warping, made of beech marine ply, oiled.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening angle 180° and...

Holex

HOLEX Workbench with 4 drawers and 2 swing doors

NOTE: Colour selection possibleVersion: Worktop 40 mm thick, non-warping beech marine ply, finished with clear UV varnish.Frame - welded sheet metal.Drawers of sheet metal with low-friction rollers of Delrin.Sheet metal doors with plastic grips, opening...

Holex

HOLEX Workshop file set

Version: Popular tool sets in two-colour PE rigid foam inlays. The closed-pore foam is oil-resistant and does not absorb liquids of any sort. Upper layer is anthracite, the underlying contrast colour is grey, thereby indicating any missing tools...

Holex

HOLEX Workshop set

Version: Popular tool sets in two-colour moulded PE rigid foam inlays. The closed-pore foam is oil-resistant and does not absorb liquids of any sort. Upper layer is anthracite, the underlying contrast colour is grey, thus indicates any missing tools...