Description
Version:
Sturdy octagonal shank with cylindrical shaft. Uniformly through hardened over the entire length. Head specially annealedto prevent splintering. Actual 0.05 - 0.5 mm less than nominal diameter, prevents the pin punch from jamming in the hole.
Standard:
DIN 6450.
Safety tested to DIN 7255.
Material:
Standard quality of chrome vanadium air hardening steel, painted.
| Point D | 2 mm | |
| Standard | DIN 6450 C | |
| overall length L1 | 150 mm | |
| Mandrel length L2 | 30 mm | |
| Shank S | 10 mm | |
| Material | Chrome vanadium air hardening steel | |
| Surface | painted | |
| Type of product | Parallel pin punches | |
| Article number | 747000 2 | |
| EAN / GTIN | 4049002002786 | |
| Manufacturer number | 450 002 0 |
| Point D | 3 mm | |
| Standard | DIN 6450 C | |
| overall length L1 | 150 mm | |
| Mandrel length L2 | 40 mm | |
| Shank S | 10 mm | |
| Material | Chrome vanadium air hardening steel | |
| Surface | painted | |
| Type of product | Parallel pin punches | |
| Article number | 747000 3 | |
| EAN / GTIN | 4049002002809 | |
| Manufacturer number | 450 003 0 |
| Point D | 4 mm | |
| Standard | DIN 6450 C | |
| overall length L1 | 150 mm | |
| Mandrel length L2 | 50 mm | |
| Shank S | 10 mm | |
| Material | Chrome vanadium air hardening steel | |
| Surface | painted | |
| Type of product | Parallel pin punches | |
| Article number | 747000 4 | |
| EAN / GTIN | 4049002002823 | |
| Manufacturer number | 450 004 0 |
| Point D | 5 mm | |
| Standard | DIN 6450 C | |
| overall length L1 | 150 mm | |
| Mandrel length L2 | 50 mm | |
| Shank S | 10 mm | |
| Material | Chrome vanadium air hardening steel | |
| Surface | painted | |
| Type of product | Parallel pin punches | |
| Article number | 747000 5 | |
| EAN / GTIN | 4049002002847 | |
| Manufacturer number | 450 005 0 |
| Point D | 6 mm | |
| Standard | DIN 6450 C | |
| overall length L1 | 150 mm | |
| Mandrel length L2 | 50 mm | |
| Shank S | 10 mm | |
| Material | Chrome vanadium air hardening steel | |
| Surface | painted | |
| Type of product | Parallel pin punches | |
| Article number | 747000 6 | |
| EAN / GTIN | 4049002002854 | |
| Manufacturer number | 450 006 0 |
| Point D | 8 mm | |
| Standard | DIN 6450 C | |
| overall length L1 | 150 mm | |
| Mandrel length L2 | 50 mm | |
| Shank S | 12 mm | |
| Material | Chrome vanadium air hardening steel | |
| Surface | painted | |
| Type of product | Parallel pin punches | |
| Article number | 747000 8 | |
| EAN / GTIN | 4049002002878 | |
| Manufacturer number | 450 008 0 |
