Shop by Category

Garant

GARANT Table trolley T9

Version: 2 shelves.Middle shelf available as an accessory. Platform made of chipboard with anthracite-coloured scratch-resistant surface.Welded steel construction.Handle with Haptoprene® inlay and impact-resistant polypropylene.2 fixed wheels and 2...

Garant

GARANT Table trolley T9 with 2 trays

Version: With 2 securely welded oil-tight trays 37 mm high edge.An additional shelf is available for insertion as a middle shelf.Welded steel construction.Handle with Haptoprene® inlay and impact-resistant polypropylene.2 fixed wheels and 2 castors (with...

Garant

GARANT Table trolley with height-adjustable platform TA9

Version: Welded steel construction, platform of chipboard with anthracite-coloured scratch-resistant surface. Height is adjustable manually by means of a hand crank. By this means the charging shelf can be moved up and down with 4 mechanical spindle...

Garant

GARANT TAG (transponder) for G-ELS

Version: In TAG mode (combination with the admin card No. 960013 size TAG), the TAG takes over the function of the key that is used to open and close the lock. The free memory area on the TAG can be used for other applications. The TAG can also be used...

Garant

GARANT Tape measure

Garant

GARANT Tapered double probe tip glued in probe tip holder ? 1 mm

Garant

GARANT Tapered probe tip ? 1 mm

Garant

GARANT Tapered probe tip ? 1.0 mm

Garant

GARANT Tapered probe tip ? 3.5 mm

Garant

GARANT Tapered probe tip ? 3.5 mm

Garant

GARANT Test standard

Garant

GARANT TFT / keyboard holder

NOTE: Colour selection possibleVersion: VESA mounting including a shelf for a keyboard, can be inclined up to 45°. For flat screens up to 22 . Suitable for: For installation on swivel arm No. 928170. Colour: RAL 7035 light grey powder coated. Colour...

Garant

GARANT TFT holder

Version: Made of sheet steel. VESA bracket (75 and 100 mm) for flat screens up to 24 inches.Can be inclined up to 45°. Suitable for: For installation on swivel arm No. 928170. Colour: RAL 7016 anthracite, powder coated. Not configurable. Safe working...

Garant

Garant Through hole machine taps + tapping drills, for metric threads: M3-12

Metric Machine Tap Set | M3–M12 | DIN 371 & DIN 376 Standard Product Overview:This premium metric machine tap set is designed for precise internal threading from M3 to M12, conforming to DIN 371 and DIN 376 standards. Featuring a 60° flank...

Garant

Garant Through hole taps, short + tapping drills + tap wrench, for metric threads: M3-12

Metric Spiral Point Tap Set | M3–M12 | DIN 352 Standard Product Overview:This high-quality metric spiral point tap set includes precision tools for cutting internal threads from M3 to M12. Designed to DIN 352 standards with a 60° flank angle,...

Garant

GARANT Tile chisel SDS-plus - 250 mm

Version: Wear resistant, bead blasted surface.High-quality fully annealed SDS-max steel for a long working life. The design and cutter geometry create a high removal rate. Application: For concrete, masonry, and natural stone.Ideal for removing tiles...

Garant

GARANT Tool block insertion frame, Width 500 mm

NOTE: Colour selection possibleVersion: The side pieces can be fitted individually with carrier rails No. 970110 and tool carriers. The modules can be fitted horizontally or at an angle. Side pieces with cross braces; for individual fitting. Colour:...

Garant

GARANT Tool board with 6 textile shaft pockets and tool holder

Suitable for: Service tool cases No. 692810 ?" 692838.

Garant

GARANT Tool board with 9 textile shaft pockets and tool holder

Suitable for: Service tool cases No. 692810 ?" 692838.

Garant

GARANT Tool carrier for perforated panel

NOTE: Colour selection possibleVersion: Made of sheet metal with plastic GARANT tool socket inserts. Bracket: For individual fitting of tool carriers No. 970125; 970130. Suitable for: For hanging into perforated panels ? 9×9 mm in a 37 mm grid. Colour:...