Shop by Category

Holex

HOLEX Single-hand knife

Version: Lockable single-hand knife with stainless blade. Handle of aluminium with non-slip inlays and clip. Advantage: Quick, easy opening and closing of the blade. Note: Please comply with the relevant national offensive weapons regulations! Germany ?...

Holex

HOLEX Sledge hammer with hickory handle

Version: Forged hammer head, hardened, tempered, and ground on all faces. Surface painted black, working faces bright finished.With hickory handle. Standard: DIN 1042 Material: Special tool steel. Handle length: 600 mm

Holex

HOLEX Sledgehammer

Version: Drop-forged hammer head. Faces hardened and tempered. Head painted black, faces bright finished.Sledgehammer with shaped hickory handle. Standard: DIN 6475 Material: Special tool steel. Handle length: 600 mm

Holex

HOLEX Slogging ring spanner, straight

Version: Drop forged, with short, strong profile shaft and reinforced striking end. Standard: DIN 7444 Material: Chrome vanadium steel, phosphated. Spanner length L: 166 mmRing ? D: 40.5 mmRing thickness h: 15 mm

Holex

HOLEX Small cable cutter

Version: Head with sickle-shaped blades. Handles with plastic grips. Cuts smoothly and cleanly without crushing.Light stainless steel model. Application: For cutting copper and aluminium cables. Cutting capacity up to ?: 8 mmoverall length: 125 mm

Holex

HOLEX Small comparator stand

Holex

HOLEX Small double open ended spanner

Version: With very slim heads. Unequal jaw angles (15° and 75°), same jaw width each end. Material: Chrome vanadium steel, chrome-plated. Spanner length L: 120 mmmaximum jaw width b1: 22.5 mmmaximum jaw height h: 5 mm

Holex

HOLEX Small double open ended spanner set, chrome-plated

Version: With very slim heads. Unequal jaw angles (15° and 75°), same jaw width each end. Material: Chrome vanadium steel, chrome-plated. Supplied with: 1 each small double open ended spanner No. 612200 / 612205: Size 6; 7; 8; 9; 10; 11; 12; 13; 14 in a...

Holex

HOLEX Small pipe cutter with 4 guide rollers

Version: Die-cast magnesium body, enclosed spindle and precision telescopic guide. 4 guide rollers (secure support even for large ?) with recess. Ergonomic handle with spare cutter wheel No. 819100. Manual deburrer retractable into the body. Application:...

Holex

HOLEX Snipe nose pliers, angled, bright finished, with grips

These Holex Angled Jaws Snipe Nose Pliers with Side Cutter and covered grips are induction hardened, bright finished snipe nose Hand Tools with multi-component covering and available in two lengths. Version: Very long snipe nose jaws. Cutting edges...

Holex

HOLEX Snipe-nose pliers set, long version 3 pieces

Version: Robust pliers of chrome vanadium steel, nickel-plated. Double plastic coating on the handles for good grip, inner faces of jaws serrated. Application: Gripping and assembling recessed or inaccessible parts. Supplied with: 1 snipe nose pliers,...

Holex

HOLEX Snipe-nose pliers, angled VDE insulated

Version: Very long snipe nose jaws. Cutting edges induction hardened (approx. 61 HRC), suitable for cutting hard and soft wire. Serrated inside jaws.Jaws bright finished, handles with multi-component covering.Insulated to DIN EN IEC 60900 / VDE...

Holex

HOLEX Snipe-nose pliers, straight VDE insulated

Description Version: Very long snipe nose jaws. Cutting edges induction hardened (approx. 61 HRC), suitable for cutting hard and soft wire. Serrated inside jaws.Plastic-coated handles to DIN EN 60900 / VDE 0682-201 for working at voltages up to 1000 V...

Holex

HOLEX Snipe-nose pliers, straight, bright finished, with grips

These Holex Snipe Nose Pliers Straight Jaws with Side Cutter are bright finished Hand Tools with multi-component covering and available in two lengths. Specifications:Very long snipe nose jaws with cutting edges induction hardened (approx. 61 HRC) and...

Holex

HOLEX Socket set

Version: Drives / accessories to DIN 3122 / 3123; sockets to DIN 3124. Internal / external square drives to DIN 3120.All parts in plastic cases.Economy version. Material: Chrome vanadium steel, chrome-plated. Supplied with: 148 pieces ? 1/4; 3/8; 1/2...

Holex

HOLEX Socket set 1/2 inch

Version: Popular tool sets in two-colour PE rigid foam inlays. The closed-pore foam is oil-resistant and does not absorb liquids of any sort. Upper layer is anthracite, the underlying contrast colour is grey, thereby indicating any missing tools.The...

Holex

HOLEX Socket set 1/2 inch and 1/4 inch

Version: Popular tool sets in two-colour moulded PE rigid foam inlays. The closed-pore foam is oil-resistant and does not absorb liquids of any sort. Upper layer is anthracite, the underlying contrast colour is grey, thereby indicating any missing tools...

Holex

HOLEX Socket set 1/2 inch square drive 12 pieces

Version: Drives / accessories to DIN 3122 / 3123; sockets to DIN 3124. Internal / external square drives to DIN 3120. Application: For hexagon head screws / nuts with thread M6 ? M16. Material: Chrome vanadium steel, chrome-plated. Supplied with: Sockets...

Holex

HOLEX Socket set 1/2 inch square drive 16 pieces

Version: Drives / accessories to DIN 3122 / 3123; sockets to DIN 3124. Internal / external square drives to DIN 3120. With bi-hexagon sockets No. 642120. Application: For hexagon head screws / nuts with thread M6 ? M22. Material: Chrome vanadium steel,...

Holex

HOLEX Socket set 1/2 inch square drive 22 pieces

Version: Drives / accessories to DIN 3122 / 3123; sockets to DIN 3124. Internal / external square drives to DIN 3120. Application: For hexagon head screws / nuts with thread M6 ? M20 and for spark plugs. Material: Chrome vanadium steel, chrome-plated...